P27ED — Transmission Range Control A Position Sensor/Switch Circuit Low

What Does P27ED Mean?

P27ED is a diagnostic trouble code indicating: Transmission Range Control A Position Sensor/Switch Circuit Low. This code relates to the powertrain system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.

Symptoms of P27ED

⚠️ Check Engine Light (MIL) illuminated
⚠️ Transmission Range Control A Position Sensor/Switch reading at zero or minimum value
⚠️ Related system not functioning or in fail-safe mode
⚠️ Reduced engine performance

Common Causes

🔍 Open or broken wire in Transmission Range Control A Position Sensor/Switch circuit
🔍 Poor ground connection at Transmission Range Control A Position Sensor/Switch
🔍 Faulty Transmission Range Control A Position Sensor/Switch with no output signal
🔍 Disconnected or loose Transmission Range Control A Position Sensor/Switch connector
🔍 Blown fuse in related circuit

Frequently Asked Questions

What does P27ED mean?

P27ED indicates: Transmission Range Control A Position Sensor/Switch Circuit Low. The vehicle's computer has detected that the Transmission Range Control A Position Sensor/Switch is not operating within its expected parameters and stored this diagnostic trouble code.

Can I drive with code P27ED?

You can drive short distances for essential trips, but schedule a diagnosis soon. Driving with P27ED for extended periods may cause additional problems.

How much does it cost to fix P27ED?

Repair costs for P27ED typically range from $20 to $300, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80–$150 at most shops) will identify the exact cause before committing to expensive parts.

What To Do Next

Possible Fixes

🔧 Repair broken wire or restore ground in Transmission Range Control A Position Sensor/Switch circuit
🔧 Clean and secure Transmission Range Control A Position Sensor/Switch connector and ground points
🔧 Replace failed Transmission Range Control A Position Sensor/Switch

1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.

P27ED: Transmission Range Control A Position Sensor/Switch Circuit Low