P2747 — Intermediate Shaft Speed Sensor B Circuit No Signal

What Does P2747 Mean?

P2747 is a diagnostic trouble code indicating: Intermediate Shaft Speed Sensor B Circuit No Signal. This code relates to the powertrain system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.

Symptoms of P2747

⚠️ Check Engine Light (MIL) illuminated
⚠️ Erratic Intermediate Shaft Speed Sensor B readings
⚠️ Related system operating intermittently
⚠️ Reduced engine performance

Common Causes

🔍 Wiring issue in Intermediate Shaft Speed Sensor B circuit (damaged, chafed, or corroded)
🔍 Faulty Intermediate Shaft Speed Sensor B connector or terminal
🔍 Failed Intermediate Shaft Speed Sensor B
🔍 ECM/PCM connection issue

Frequently Asked Questions

What does P2747 mean?

P2747 indicates: Intermediate Shaft Speed Sensor B Circuit No Signal. The vehicle's computer has detected that the Intermediate Shaft Speed Sensor B is not operating within its expected parameters and stored this diagnostic trouble code.

Can I drive with code P2747?

You can drive short distances for essential trips, but schedule a diagnosis soon. Driving with P2747 for extended periods may cause additional problems.

How much does it cost to fix P2747?

Repair costs for P2747 typically range from $80 to $300, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80–$150 at most shops) will identify the exact cause before committing to expensive parts.

What To Do Next

Possible Fixes

🔧 Inspect and repair Intermediate Shaft Speed Sensor B wiring and connectors
🔧 Replace faulty Intermediate Shaft Speed Sensor B

1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.

P2747: Intermediate Shaft Speed Sensor B Circuit No Signal