P0912: Gate Select Actuator Circuit Low
Severity
High
System
Transmission
What Does P0912 Mean?
P0912 is a diagnostic trouble code indicating: Gate Select Actuator Circuit Low. This code relates to the transmission system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.
Symptoms of P0912
- β οΈ Check Engine Light (MIL) illuminated
- β οΈ Gate Select Actuator reading at zero or minimum value
- β οΈ Related system not functioning or in fail-safe mode
- β οΈ Harsh or delayed shifting
Common Causes
- π Open or broken wire in Gate Select Actuator circuit
- π Poor ground connection at Gate Select Actuator
- π Faulty Gate Select Actuator with no output signal
- π Disconnected or loose Gate Select Actuator connector
- π Blown fuse in related circuit
Frequently Asked Questions
What does P0912 mean?
P0912 indicates: Gate Select Actuator Circuit Low. The vehicle's computer has detected that the Gate Select Actuator is not operating within its expected parameters and stored this diagnostic trouble code.
Can I drive with code P0912?
Only short distances if absolutely necessary. P0912 affects a critical system and should be diagnosed within a few days to avoid further damage.
How much does it cost to fix P0912?
Repair costs for P0912 typically range from $20 to $500, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80β$150 at most shops) will identify the exact cause before committing to expensive parts.
What To Do Next
Possible Fixes
- π§ Repair broken wire or restore ground in Gate Select Actuator circuit
- π§ Clean and secure Gate Select Actuator connector and ground points
- π§ Replace failed Gate Select Actuator
-
1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
-
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
-
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50β$150) pinpoints the root cause.
Related Codes
P0900
Clutch A Actuator Control Circuit/Open
P0901
Clutch A Actuator Control Circuit Range/Performance
P0902
Clutch A Actuator Control Circuit Low
P0903
Clutch A Actuator Control Circuit High
P0904
Gate Select Position Circuit A
P0905
Gate Select Position Circuit A Range/Performance
P0906
Gate Select Position Circuit A Low
P0907
Gate Select Position Circuit A High
P0908
Gate Select Position Circuit A Intermittent
P0909
Gate Select Control Error