P08B7: Clutch Pedal Position Sensor B Circuit High
Severity
High
System
Transmission
What Does P08B7 Mean?
P08B7 is a diagnostic trouble code indicating: Clutch Pedal Position Sensor B Circuit High. This code relates to the transmission system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.
Symptoms of P08B7
- β οΈ Check Engine Light (MIL) illuminated
- β οΈ Clutch Pedal Position Sensor B reading stuck at maximum value
- β οΈ Related system operating erratically or in default mode
- β οΈ Harsh or delayed shifting
Common Causes
- π Short to voltage in Clutch Pedal Position Sensor B wiring harness
- π Corroded or water-damaged Clutch Pedal Position Sensor B connector
- π Faulty Clutch Pedal Position Sensor B outputting maximum voltage
- π Damaged wiring rubbing against metal components
- π ECM/PCM internal fault (rare)
Frequently Asked Questions
What does P08B7 mean?
P08B7 indicates: Clutch Pedal Position Sensor B Circuit High. The vehicle's computer has detected that the Clutch Pedal Position Sensor B is not operating within its expected parameters and stored this diagnostic trouble code.
Can I drive with code P08B7?
Only short distances if absolutely necessary. P08B7 affects a critical system and should be diagnosed within a few days to avoid further damage.
How much does it cost to fix P08B7?
Repair costs for P08B7 typically range from $20 to $500, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80β$150 at most shops) will identify the exact cause before committing to expensive parts.
What To Do Next
Possible Fixes
- π§ Inspect and repair Clutch Pedal Position Sensor B wiring for short to voltage
- π§ Clean or replace corroded Clutch Pedal Position Sensor B connector
- π§ Replace faulty Clutch Pedal Position Sensor B
-
1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
-
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
-
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50β$150) pinpoints the root cause.
Related Codes
P0800
Transfer Case Control System (MIL Request)
P0801
Reverse Inhibit Control Circuit/Open
P0802
Transmission Control System MIL Request Circuit/Open
P0803
Upshift/Skip Shift Solenoid Control Circuit
P0804
Upshift/Skip Shift Lamp Control Circuit
P0805
Clutch Position Sensor A Circuit
P0806
Clutch Position Sensor A Circuit Range/Performance
P0807
Clutch Position Sensor A Circuit Low
P0808
Clutch Position Sensor A Circuit High
P0809
Clutch Position Sensor A Circuit Intermittent