P0803: Upshift/Skip Shift Solenoid Control Circuit
Severity
High
System
Transmission
What Does P0803 Mean?
P0803 is a diagnostic trouble code indicating: Upshift/Skip Shift Solenoid Control Circuit. This code relates to the transmission system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.
Symptoms of P0803
- β οΈ Check Engine Light (MIL) illuminated
- β οΈ Erratic Upshift/Skip Shift Solenoid readings
- β οΈ Related system operating intermittently
- β οΈ Harsh or delayed shifting
Common Causes
- π Wiring issue in Upshift/Skip Shift Solenoid circuit (damaged, chafed, or corroded)
- π Faulty Upshift/Skip Shift Solenoid connector or terminal
- π Failed Upshift/Skip Shift Solenoid
- π ECM/PCM connection issue
Frequently Asked Questions
What does P0803 mean?
P0803 indicates: Upshift/Skip Shift Solenoid Control Circuit. The vehicle's computer has detected that the Upshift/Skip Shift Solenoid is not operating within its expected parameters and stored this diagnostic trouble code.
Can I drive with code P0803?
Only short distances if absolutely necessary. P0803 affects a critical system and should be diagnosed within a few days to avoid further damage.
How much does it cost to fix P0803?
Repair costs for P0803 typically range from $150 to $500, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80β$150 at most shops) will identify the exact cause before committing to expensive parts.
What To Do Next
Possible Fixes
- π§ Inspect and repair Upshift/Skip Shift Solenoid wiring and connectors
- π§ Replace faulty Upshift/Skip Shift Solenoid
-
1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
-
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
-
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50β$150) pinpoints the root cause.
Related Codes
P0800
Transfer Case Control System (MIL Request)
P0801
Reverse Inhibit Control Circuit/Open
P0802
Transmission Control System MIL Request Circuit/Open
P0804
Upshift/Skip Shift Lamp Control Circuit
P0805
Clutch Position Sensor A Circuit
P0806
Clutch Position Sensor A Circuit Range/Performance
P0807
Clutch Position Sensor A Circuit Low
P0808
Clutch Position Sensor A Circuit High
P0809
Clutch Position Sensor A Circuit Intermittent
P080A
Clutch Position Not Learned