P089D — Gear Lever X Position Sensor 2 Circuit High

What Does P089D Mean?

P089D is a diagnostic trouble code indicating: Gear Lever X Position Sensor 2 Circuit High. This code relates to the transmission system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.

Symptoms of P089D

⚠️ Check Engine Light (MIL) illuminated
⚠️ Gear Lever X Position Sensor 2 reading stuck at maximum value
⚠️ Related system operating erratically or in default mode
⚠️ Harsh or delayed shifting

Common Causes

🔍 Short to voltage in Gear Lever X Position Sensor 2 wiring harness
🔍 Corroded or water-damaged Gear Lever X Position Sensor 2 connector
🔍 Faulty Gear Lever X Position Sensor 2 outputting maximum voltage
🔍 Damaged wiring rubbing against metal components
🔍 ECM/PCM internal fault (rare)

Frequently Asked Questions

What does P089D mean?

P089D indicates: Gear Lever X Position Sensor 2 Circuit High. The vehicle's computer has detected that the Gear Lever X Position Sensor 2 is not operating within its expected parameters and stored this diagnostic trouble code.

Can I drive with code P089D?

Only short distances if absolutely necessary. P089D affects a critical system and should be diagnosed within a few days to avoid further damage.

How much does it cost to fix P089D?

Repair costs for P089D typically range from $20 to $500, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80–$150 at most shops) will identify the exact cause before committing to expensive parts.

What To Do Next

Possible Fixes

🔧 Inspect and repair Gear Lever X Position Sensor 2 wiring for short to voltage
🔧 Clean or replace corroded Gear Lever X Position Sensor 2 connector
🔧 Replace faulty Gear Lever X Position Sensor 2

1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.

P089D: Gear Lever X Position Sensor 2 Circuit High