🔍

P089C: Gear Lever X Position Sensor 2 Circuit Low

Severity
High
System
Transmission
Last reviewed: Last updated:

Methodology: We combine code standards with complaint and reliability patterns, then review for clear, vehicle-first diagnosis steps.

Sources: SAE/OBD-II definitions, manufacturer service information, and public reliability reports (including NHTSA where applicable).

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

What Does P089C Mean?

P089C is a diagnostic trouble code indicating: Gear Lever X Position Sensor 2 Circuit Low. This code relates to the transmission system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.

Symptoms of P089C

Common Causes

Frequently Asked Questions

What does P089C mean?
P089C indicates: Gear Lever X Position Sensor 2 Circuit Low. The vehicle's computer has detected that the Gear Lever X Position Sensor 2 is not operating within its expected parameters and stored this diagnostic trouble code.
Can I drive with code P089C?
Only short distances if absolutely necessary. P089C affects a critical system and should be diagnosed within a few days to avoid further damage.
How much does it cost to fix P089C?
Repair costs for P089C typically range from $20 to $500, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80–$150 at most shops) will identify the exact cause before committing to expensive parts.

What To Do Next

Possible Fixes

  • 🔧 Repair broken wire or restore ground in Gear Lever X Position Sensor 2 circuit
  • 🔧 Clean and secure Gear Lever X Position Sensor 2 connector and ground points
  • 🔧 Replace failed Gear Lever X Position Sensor 2
  1. 1
    Find your vehicle above

    Click your make and model for real owner reports and common causes specific to your vehicle.

  2. 2
    Check for recalls

    Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.

  3. 3
    Get a professional diagnosis

    A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.

Related Codes

P0800 Transfer Case Control System (MIL Request) P0801 Reverse Inhibit Control Circuit/Open P0802 Transmission Control System MIL Request Circuit/Open P0803 Upshift/Skip Shift Solenoid Control Circuit P0804 Upshift/Skip Shift Lamp Control Circuit P0805 Clutch Position Sensor A Circuit P0806 Clutch Position Sensor A Circuit Range/Performance P0807 Clutch Position Sensor A Circuit Low P0808 Clutch Position Sensor A Circuit High P0809 Clutch Position Sensor A Circuit Intermittent