P080C — Upshift/Skip Shift Solenoid Control Circuit Low

What Does P080C Mean?

P080C is a diagnostic trouble code indicating: Upshift/Skip Shift Solenoid Control Circuit Low. This code relates to the transmission system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.

Symptoms of P080C

⚠️ Check Engine Light (MIL) illuminated
⚠️ Upshift/Skip Shift Solenoid reading at zero or minimum value
⚠️ Related system not functioning or in fail-safe mode
⚠️ Harsh or delayed shifting

Common Causes

🔍 Open or broken wire in Upshift/Skip Shift Solenoid circuit
🔍 Poor ground connection at Upshift/Skip Shift Solenoid
🔍 Faulty Upshift/Skip Shift Solenoid with no output signal
🔍 Disconnected or loose Upshift/Skip Shift Solenoid connector
🔍 Blown fuse in related circuit

Frequently Asked Questions

What does P080C mean?

P080C indicates: Upshift/Skip Shift Solenoid Control Circuit Low. The vehicle's computer has detected that the Upshift/Skip Shift Solenoid is not operating within its expected parameters and stored this diagnostic trouble code.

Can I drive with code P080C?

Only short distances if absolutely necessary. P080C affects a critical system and should be diagnosed within a few days to avoid further damage.

How much does it cost to fix P080C?

Repair costs for P080C typically range from $20 to $500, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80–$150 at most shops) will identify the exact cause before committing to expensive parts.

What To Do Next

Possible Fixes

🔧 Repair broken wire or restore ground in Upshift/Skip Shift Solenoid circuit
🔧 Clean and secure Upshift/Skip Shift Solenoid connector and ground points
🔧 Replace failed Upshift/Skip Shift Solenoid

1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.

P080C: Upshift/Skip Shift Solenoid Control Circuit Low