🔍
Frigidaire Washing Machine ✅ Safe for Now

Frigidaire Washing Machine Error Code E31

Frigidaire Washing Machine error code E31: Pressure sensor failure.

Last reviewed: Last updated:

Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?
✅ No — safe for now
Safe to use briefly. A faulty sensor causes poor performance but rarely immediate danger.
Can I fix it myself?
DIY Possible
Part: Temperature sensor / thermistor
How much will it cost?
DIY: $10–$60 (sensor)
Technician: $80–$250
⏱ 20–45 min

What Does Error E31 Mean on Your Frigidaire Washing Machine?

Frigidaire Washing Machine error code E31: Pressure sensor failure.

What typically fails: Temperature sensor / thermistor

What You're Probably Seeing

How to Fix It Yourself

  1. 1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
  2. 2 Test the sensor with a multimeter — check resistance against the spec in the service manual
  3. 3 Inspect the sensor's wiring harness for corrosion or loose connector
  4. 4 Replace the sensor if out of spec ($10–$50 part)
  5. 5 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Multimeter, Screwdriver set · Time: 20–45 min
💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Frigidaire Washing Machine error code E31 mean? ▼
Error code E31 on a Frigidaire Washing Machine means: Pressure sensor failure. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Frigidaire Washing Machine error code E31? ▼
First, unplug the washing machine for 60 seconds to reset the control board. If error E31 returns, the root cause (pressure sensor failure) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Frigidaire Washing Machine with error code E31? ▼
It depends on the cause. Most E31 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More Frigidaire Washing Machine Codes

All Frigidaire washing machine error codes → All Frigidaire appliance codes →

Was this page helpful?

Rate the helpfulness of this page