🔍
Frigidaire Washing Machine ⚠️ Stop Using

Frigidaire Washing Machine Error Code E23

Frigidaire Washing Machine error code E23: Drain pump relay failure on control board.

Last reviewed: Last updated:

Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?
⚠️ Stop using it
Safe to leave powered off. Do not attempt to repair circuit boards without electronics experience.
Can I fix it myself?
Technician Recommended
Part: Control board / PCB
How much will it cost?
DIY: $80–$300 (board replacement)
Technician: $200–$600
⏱ 30–90 min

What Does Error E23 Mean on Your Frigidaire Washing Machine?

Frigidaire Washing Machine error code E23: Drain pump relay failure on control board.

What typically fails: Control board / PCB

What You're Probably Seeing

What to Try First

  1. 1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
  2. 2 Check and clean the drain pump filter (usually behind a small door at the bottom front)
  3. 3 Inspect the drain hose for kinks, blockages, or improper height
  4. 4 Test the drain pump — if it hums but won't move water, replace it ($50–$120 part)
  5. 5 Check all wiring harness connections to the main control board — reseat any loose connectors
🛠️ You'll need: Screwdriver set, Multimeter · Time: 30–90 min
💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Frigidaire Washing Machine error code E23 mean? ▼
Error code E23 on a Frigidaire Washing Machine means: Drain pump relay failure on control board. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Frigidaire Washing Machine error code E23? ▼
First, unplug the washing machine for 60 seconds to reset the control board. If error E23 returns, the root cause (drain pump relay failure on control board) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Frigidaire Washing Machine with error code E23? ▼
It depends on the cause. Most E23 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More Frigidaire Washing Machine Codes

All Frigidaire washing machine error codes → All Frigidaire appliance codes →

Was this page helpful?

Rate the helpfulness of this page