🔍
Lennox - ⛔ Do Not Use

Lennox - Error Code 245

Error code 245 on a Lennox system indicates: Rollout switch open. The unit has detected this condition and may have limited or stopped operation.

Last reviewed: Last updated:

Methodology: We combine OEM HVAC documentation with field repair patterns, then review for safety-first troubleshooting.

Sources: HVAC manufacturer documentation, installation/service manuals, and technician-reported repair patterns.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Is it safe?
⛔ No — stop using
Do NOT operate — potential gas or CO hazard. Ventilate the area and call a technician immediately.
Can I fix it?
Technician Required
Repair cost
Pro: $150–$600
⏱ 1–3 hours (pro)

What Does Error Code 245 Mean?

Error code 245 on a Lennox system indicates: Rollout switch open. The unit has detected this condition and may have limited or stopped operation.

Part that typically fails: Gas valve / igniter / heat exchanger

Do NOT operate — potential gas or CO hazard. Ventilate the area and call a technician immediately.

Symptoms You May Notice

What the Technician Will Do

🔧 Professional repair required. Do not attempt DIY — this repair requires specialized tools or certification.
  1. 1 Check the error code in your owner's manual for model-specific instructions
  2. 2 If the error persists after reset, contact a qualified technician
⚡ Quick tip: Always try a full power reset first — turn the unit off at the breaker, wait 30 seconds, restore power.

Frequently Asked Questions

What does error code 245 mean on a Lennox? ▼
Error code 245 on a Lennox furnace or AC unit indicates: Rollout switch open. This means the unit has detected a problem and stopped or limited operation to prevent further damage.
How do I fix Lennox error code 245? ▼
Start by turning the unit off for 30 seconds and restarting. If the error persists, the underlying issue (rollout switch open) needs to be addressed. Check wiring and connections first before replacing components.
Is error code 245 serious? ▼
It depends on the root cause. Some 245 errors resolve with a simple reset. Others indicate a failed component that requires professional repair. Don't ignore it — operating with this error can cause further damage.

More Lennox - Error Codes

All Lennox - codes → All Lennox HVAC codes →

Was this page helpful?

Rate the helpfulness of this page