🔍
Lennox ⚠️ Use With Caution

Lennox Error Code 241

Error code 241 on a Lennox system indicates: Draft pressure switch failed open. The unit has detected this condition and may have limited or stopped operation.

Last reviewed: Last updated:

Methodology: We combine OEM HVAC documentation with field repair patterns, then review for safety-first troubleshooting.

Sources: HVAC manufacturer documentation, installation/service manuals, and technician-reported repair patterns.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Is it safe?
⚠️ Use with caution
Stop using until the cause is identified. Check your owner's manual for model-specific guidance.
Can I fix it?
Technician Recommended
Tools: Multimeter, Screwdriver set
Repair cost
DIY: Varies
Pro: $100–$500
⏱ 30–120 min

What Does Error Code 241 Mean?

Error code 241 on a Lennox system indicates: Draft pressure switch failed open. The unit has detected this condition and may have limited or stopped operation.

Part that typically fails: See description above

Stop using until the cause is identified. Check your owner's manual for model-specific guidance.

Symptoms You May Notice

Troubleshooting Steps

  1. 1 Check the error code in your owner's manual for model-specific instructions
  2. 2 Contact a licensed HVAC technician — refrigerant issues require certification
  3. 3 If the error persists after reset, contact a qualified technician
🛠️ Tools needed: Multimeter, Screwdriver set · Time: 30–120 min
⚡ Quick tip: Always try a full power reset first — turn the unit off at the breaker, wait 30 seconds, restore power.

Frequently Asked Questions

What does error code 241 mean on a Lennox? ▼
Error code 241 on a Lennox furnace or AC unit indicates: Draft pressure switch failed open. This means the unit has detected a problem and stopped or limited operation to prevent further damage.
How do I fix Lennox error code 241? ▼
Start by turning the unit off for 30 seconds and restarting. If the error persists, the underlying issue (draft pressure switch failed open) needs to be addressed. Check wiring and connections first before replacing components.
Is error code 241 serious? ▼
It depends on the root cause. Some 241 errors resolve with a simple reset. Others indicate a failed component that requires professional repair. Don't ignore it — operating with this error can cause further damage.

More Lennox Error Codes

All Lennox codes → All Lennox HVAC codes →

Was this page helpful?

Rate the helpfulness of this page