🔍
Whirlpool GHW9100LW2 Washing Machine

Whirlpool GHW9100LW2 — Error Code F2E3

Whirlpool GHW9100LW2 error code F2E3: Keypad / user interface error.

Last reviewed: Last updated:

Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Looking for the full diagnosis and repair guide? View complete Whirlpool Washing Machine error code F2E3 guide →

Repair guidance: the symptoms and steps below come from the canonical Whirlpool Washing Machine F2E3 guide and apply to GHW9100LW2 unless your manual says otherwise.

Symptoms on GHW9100LW2

How to Fix Error F2E3 on GHW9100LW2

  1. 1 Power-cycle the washer for 60 seconds and try the controls again
  2. 2 Press each keypad button once to check for a stuck or non-responsive key
  3. 3 Reseat the ribbon cable between the console and main control if the model allows safe access
  4. 4 Replace the user interface panel if the ribbon is secure and the keypad still fails
🛠️ You'll need: Multimeter, Screwdriver set · Time: 30–120 min

Questions People Also Ask for Error F2E3

What does Whirlpool Washing Machine error code F2E3 mean? ▼
Error code F2E3 on a Whirlpool washer means the console keypad or user interface board is not communicating correctly with the control.
How do I fix Whirlpool Washing Machine error code F2E3? ▼
Power-cycle the washer, then check for stuck buttons and reseat the console ribbon cable. If the keypad still fails, the user interface board usually needs replacement.
Is it safe to use my Whirlpool Washing Machine with error code F2E3? ▼
Leave the washer off until the controls respond normally so it does not start or stop unpredictably.

More for this Model

All GHW9100LW2 error codes → All Whirlpool washing machine codes →