🔍
Whirlpool Washing Machine ⚠️ Stop Using

Whirlpool Washing Machine Error Code F2E3

Whirlpool washer error code F2E3: UI fault.

Last reviewed: Last updated:

Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?
⚠️ Stop using it
Leave the washer off until the control panel responds normally and no keys appear stuck.
Can I fix it myself?
DIY Possible
Part: User interface board / keypad / ribbon cable
How much will it cost?
DIY: $0–$180 (console or UI board)
Technician: $120–$320
⏱ 20–60 min

What Does Error F2E3 Mean on Your Whirlpool Washing Machine?

Whirlpool washer error code F2E3: UI fault.

What typically fails: User interface board / keypad / ribbon cable

What You're Probably Seeing

How to Fix It Yourself

  1. 1 Power-cycle the washer for 60 seconds and try the controls again
  2. 2 Press each keypad button once to check for a stuck or non-responsive key
  3. 3 Reseat the ribbon cable between the console and main control if the model allows safe access
  4. 4 Replace the user interface panel if the ribbon is secure and the keypad still fails
🛠️ You'll need: Screwdriver set, Flashlight, Multimeter · Time: 20–60 min
💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Whirlpool Washing Machine error code F2E3 mean? ▼
Error code F2E3 on a Whirlpool washer means the console keypad or user interface board is not communicating correctly with the control.
How do I fix Whirlpool Washing Machine error code F2E3? ▼
Power-cycle the washer, then check for stuck buttons and reseat the console ribbon cable. If the keypad still fails, the user interface board usually needs replacement.
Is it safe to use my Whirlpool Washing Machine with error code F2E3? ▼
Leave the washer off until the controls respond normally so it does not start or stop unpredictably.

More Whirlpool Washing Machine Codes

All Whirlpool washing machine error codes → All Whirlpool appliance codes →

Was this page helpful?

Rate the helpfulness of this page