Whirlpool
GHW9100LW0
Washing Machine
Whirlpool GHW9100LW0 — Error Code F2E3
Whirlpool GHW9100LW0 error code F2E3: Keypad / user interface error.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Whirlpool Washing Machine error code F2E3 guide →
Repair guidance: the symptoms and steps below come from the canonical Whirlpool Washing Machine F2E3 guide and apply to GHW9100LW0 unless your manual says otherwise.
Symptoms on GHW9100LW0
- ⚠️ Error code displayed
- ⚠️ Machine stops mid-cycle
- ⚠️ Cycle won't complete
How to Fix Error F2E3 on GHW9100LW0
- 1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Multimeter, Screwdriver set
· Time: 30–120 min
Questions People Also Ask for Error F2E3
What does Whirlpool Washing Machine error code F2E3 mean? ▼
Error code F2E3 on a Whirlpool Washing Machine means: Keypad / user interface error. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Whirlpool Washing Machine error code F2E3? ▼
First, unplug the washing machine for 60 seconds to reset the control board. If error F2E3 returns, the root cause (keypad / user interface error) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Whirlpool Washing Machine with error code F2E3? ▼
It depends on the cause. Most F2E3 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.