🔍
Samsung Washing Machine ✅ Safe for Now

Samsung Washing Machine Error Code 5E

Samsung Washing Machine error code 5E: Drainage error — not draining.

Last reviewed: Last updated:

Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?
✅ No — safe for now
Safe to leave off. Fix soon — water backup can cause mold or floor damage.
Can I fix it myself?
DIY Possible
Part: Drain pump / drain hose / filter
How much will it cost?
DIY: $0–$150 (pump or hose)
Technician: $100–$300
⏱ 20–45 min

What Does Error 5E Mean on Your Samsung Washing Machine?

Samsung Washing Machine error code 5E: Drainage error — not draining.

What typically fails: Drain pump / drain hose / filter

What You're Probably Seeing

How to Fix It Yourself

  1. 1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
  2. 2 Check and clean the drain pump filter (usually behind a small door at the bottom front)
  3. 3 Inspect the drain hose for kinks, blockages, or improper height
  4. 4 Test the drain pump — if it hums but won't move water, replace it ($50–$120 part)
  5. 5 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Screwdriver set, Bucket, Wet/dry vacuum · Time: 20–45 min
💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Samsung Washing Machine error code 5E mean? ▼
Error code 5E on a Samsung Washing Machine means: Drainage error — not draining. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Samsung Washing Machine error code 5E? ▼
First, unplug the washing machine for 60 seconds to reset the control board. If error 5E returns, the root cause (drainage error — not draining) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Samsung Washing Machine with error code 5E? ▼
It depends on the cause. Most 5E errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More Samsung Washing Machine Codes

All Samsung washing machine error codes → All Samsung appliance codes →

Was this page helpful?

Rate the helpfulness of this page