🔍
Samsung Washing Machine ✅ Safe for Now

Samsung Washing Machine Error Code 4C

Samsung Washing Machine error code 4C: Water supply problem — not filling.

Last reviewed: Last updated:

Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?
✅ No — safe for now
Safe — unit stops when it can't fill. Check the supply hose and valve before calling a technician.
Can I fix it myself?
DIY Possible
Part: Water inlet valve / supply hose
How much will it cost?
DIY: $15–$80 (inlet valve)
Technician: $100–$250
⏱ 20–40 min

What Does Error 4C Mean on Your Samsung Washing Machine?

Samsung Washing Machine error code 4C: Water supply problem — not filling.

What typically fails: Water inlet valve / supply hose

What You're Probably Seeing

How to Fix It Yourself

  1. 1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
  2. 2 Check that the water supply valve behind the machine is fully open
  3. 3 Inspect the inlet hose screen filter — sediment often blocks it (unscrew hose, clean mesh screen)
  4. 4 Test the water inlet valve with a multimeter — replace if no continuity ($15–$80 part)
  5. 5 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Screwdriver set, Pliers, Multimeter · Time: 20–40 min
💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Samsung Washing Machine error code 4C mean? ▼
Error code 4C on a Samsung Washing Machine means: Water supply problem — not filling. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Samsung Washing Machine error code 4C? ▼
First, unplug the washing machine for 60 seconds to reset the control board. If error 4C returns, the root cause (water supply problem — not filling) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Samsung Washing Machine with error code 4C? ▼
It depends on the cause. Most 4C errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More Samsung Washing Machine Codes

All Samsung washing machine error codes → All Samsung appliance codes →

Was this page helpful?

Rate the helpfulness of this page