Samsung Dryer ⚠️ Stop Using

Samsung Dryer Error Code FC

Samsung Dryer error code FC: Fan motor error.

Last reviewed: Aug 7, 2026 Last updated: Aug 7, 2026

Methodology: Reviewed against official Samsung dryer support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Samsung Support - Dryer error codes and troubleshooting — Official Samsung support guidance for dryer error codes, heating, venting, door, sensor, and power troubleshooting.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

⚠️ Stop using it

Caution — continued use without airflow causes overheating. Turn off until repaired.

Can I fix it myself?

Technician Recommended

Part: Fan motor / run capacitor

How much will it cost?

DIY: $30–$200 (motor or capacitor)

Technician: $150–$500

⏱ 45–90 min

What Does Error FC Mean on Your Samsung Dryer?

Samsung Dryer error code FC: Fan motor error.

What typically fails: Fan motor / run capacitor

What You're Probably Seeing

→ Error code displayed
→ Dryer not completing cycle
→ Clothes still wet after full cycle

Common Causes

• Door switch not reporting closed
• Door strike or latch misaligned
• Loose door-switch wiring or failed switch

What to Try First

1 Unplug the dryer for 60 seconds then plug back in — this resets the control board and clears many temporary faults
2 Check the drive belt — if broken or slipping, replace it ($10–$30 part)
3 Test the motor with a multimeter — a technician should replace it if failed ($150–$400)
4 If the error persists after basic troubleshooting, contact a qualified appliance technician

🛠️ You'll need: Multimeter, Screwdriver set, Capacitor tester · Time: 45–90 min

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Samsung Dryer error code FC mean? ▼

Error code FC on a Samsung Dryer means: Fan motor error. The appliance detected this condition and has stopped or limited operation to prevent further damage.

How do I fix Samsung Dryer error code FC? ▼

First, unplug the dryer for 60 seconds to reset the control board. If error FC returns, the root cause (fan motor error) needs to be addressed — check connections, filters, and hoses before calling a technician.

Is it safe to use my Samsung Dryer with error code FC? ▼

It depends on the cause. Most FC errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More Samsung Dryer Codes

All Samsung dryer error codes → All Samsung appliance codes →