🔍
Samsung Dryer ✅ Safe for Now

Samsung Dryer Error Code EH

Samsung Dryer error code EH: Heat error — dryer not heating.

Last reviewed: Last updated:

Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?
✅ No — safe for now
Safe to use on cold settings temporarily. Heating element failure is a common DIY repair.
Can I fix it myself?
DIY Possible
Part: Heating element / thermal fuse / thermistor
How much will it cost?
DIY: $20–$100 (element or thermistor)
Technician: $100–$300
⏱ 30–60 min

What Does Error EH Mean on Your Samsung Dryer?

Samsung Dryer error code EH: Heat error — dryer not heating.

What typically fails: Heating element / thermal fuse / thermistor

What You're Probably Seeing

What to Try First

  1. 1 Unplug the dryer for 60 seconds then plug back in — this resets the control board and clears many temporary faults
  2. 2 Test the heating element with a multimeter — replace if no continuity ($20–$80 part)
  3. 3 Check the thermal fuse — a blown fuse means there was overheating, also check the vent
  4. 4 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Multimeter, Screwdriver set, Nut driver · Time: 30–60 min
💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Samsung Dryer error code EH mean? ▼
Error code EH on a Samsung Dryer means: Heat error — dryer not heating. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Samsung Dryer error code EH? ▼
First, unplug the dryer for 60 seconds to reset the control board. If error EH returns, the root cause (heat error — dryer not heating) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Samsung Dryer with error code EH? ▼
It depends on the cause. Most EH errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More Samsung Dryer Codes

All Samsung dryer error codes → All Samsung appliance codes →

Was this page helpful?

Rate the helpfulness of this page