Frigidaire
LTF2140ES3
Washing Machine
Frigidaire LTF2140ES3 — Error Code E13
Frigidaire LTF2140ES3 error code E13: Water leak in tub or pressure switch hose.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Frigidaire Washing Machine error code E13 guide →
Repair guidance: the symptoms and steps below come from the canonical Frigidaire Washing Machine E13 guide and apply to LTF2140ES3 unless your manual says otherwise.
Symptoms on LTF2140ES3
- ⚠️ Error code displayed
- ⚠️ Machine stops mid-cycle
- ⚠️ Cycle won't complete
How to Fix Error E13 on LTF2140ES3
- 1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Screwdriver set, Towels, Flashlight
· Time: 30–120 min
Questions People Also Ask for Error E13
What does Frigidaire Washing Machine error code E13 mean? ▼
Error code E13 on a Frigidaire Washing Machine means: Water leak in tub or pressure switch hose. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Frigidaire Washing Machine error code E13? ▼
First, unplug the washing machine for 60 seconds to reset the control board. If error E13 returns, the root cause (water leak in tub or pressure switch hose) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Frigidaire Washing Machine with error code E13? ▼
It depends on the cause. Most E13 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.