Frigidaire
LTF2140ES0
Washing Machine
Frigidaire LTF2140ES0 — Error Code E23
Frigidaire LTF2140ES0 error code E23: Drain pump relay failure on control board.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Frigidaire Washing Machine error code E23 guide →
Repair guidance: the symptoms and steps below come from the canonical Frigidaire Washing Machine E23 guide and apply to LTF2140ES0 unless your manual says otherwise.
Symptoms on LTF2140ES0
- ⚠️ Water left in drum after cycle
- ⚠️ Machine stops during spin
- ⚠️ Wet clothes after full cycle
How to Fix Error E23 on LTF2140ES0
- 1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 Check and clean the drain pump filter (usually behind a small door at the bottom front)
- 3 Inspect the drain hose for kinks, blockages, or improper height
- 4 Test the drain pump — if it hums but won't move water, replace it ($50–$120 part)
- 5 Check all wiring harness connections to the main control board — reseat any loose connectors
🛠️ You'll need: Screwdriver set, Multimeter
· Time: 30–90 min
Questions People Also Ask for Error E23
What does Frigidaire Washing Machine error code E23 mean? ▼
Error code E23 on a Frigidaire Washing Machine means: Drain pump relay failure on control board. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Frigidaire Washing Machine error code E23? ▼
First, unplug the washing machine for 60 seconds to reset the control board. If error E23 returns, the root cause (drain pump relay failure on control board) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Frigidaire Washing Machine with error code E23? ▼
It depends on the cause. Most E23 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.