Frigidaire
GLWS1349AS1
Washing Machine
Frigidaire GLWS1349AS1 — Error Code E13
Frigidaire GLWS1349AS1 error code E13: Water leak in tub or pressure switch hose.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Frigidaire Washing Machine error code E13 guide →
Repair guidance: the symptoms and steps below come from the canonical Frigidaire Washing Machine E13 guide and apply to GLWS1349AS1 unless your manual says otherwise.
Symptoms on GLWS1349AS1
- ⚠️ Water under the washer or around the door
- ⚠️ Washer stops to prevent more leaking
- ⚠️ Fill or drain cycle aborts early
How to Fix Error E13 on GLWS1349AS1
- 1 Press cancel and stop the cycle if water is still entering the tub
- 2 Shut off the hot and cold supply valves, then unplug the washer before inspecting it
- 3 Look for water coming from the door boot, dispenser, drain hose, or the small pressure hose that runs to the tub
- 4 Reseat any loose hose clamps and replace a split pressure hose or torn door boot before using the washer again
- 5 If you cannot find the leak source quickly, leave the washer off and book service
🛠️ You'll need: Screwdriver set, Towels, Flashlight
· Time: 30–120 min
Questions People Also Ask for Error E13
What does Frigidaire Washing Machine error code E13 mean? ▼
Error code E13 on a Frigidaire Washing Machine means: Water leak in tub or pressure switch hose. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Frigidaire Washing Machine error code E13? ▼
Start by stopping the cycle, shutting off the water supply, and unplugging the washer. If error E13 returns, inspect the pressure hose, door boot, drain hose, and dispenser path for an active leak before using the washer again.
Is it safe to use my Frigidaire Washing Machine with error code E13? ▼
No. E13 points to a water leak, so leave the washer off until the leak source is found and corrected.