Frigidaire
FTF2140ES3
Washing Machine
Frigidaire FTF2140ES3 — Error Code E31
Frigidaire FTF2140ES3 error code E31: Pressure sensor failure.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Frigidaire Washing Machine error code E31 guide →
Repair guidance: the symptoms and steps below come from the canonical Frigidaire Washing Machine E31 guide and apply to FTF2140ES3 unless your manual says otherwise.
Symptoms on FTF2140ES3
- ⚠️ Error code displayed
- ⚠️ Machine stops mid-cycle
- ⚠️ Cycle won't complete
How to Fix Error E31 on FTF2140ES3
- 1 Cancel the cycle and drain the washer if it is stuck full of water
- 2 Unplug the washer and inspect the pressure switch hose for soap residue, a kink, or a split near the tub
- 3 Reseat the pressure sensor connector and clean any moisture from the area
- 4 Replace the pressure sensor if hose and wiring are intact but readings remain out of range
- 5 If the washer still overfills or misreads water level, schedule service before using it again
🛠️ You'll need: Multimeter, Screwdriver set
· Time: 20–45 min
Questions People Also Ask for Error E31
What does Frigidaire Washing Machine error code E31 mean? ▼
Error code E31 on a Frigidaire Washing Machine means: Pressure sensor failure. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Frigidaire Washing Machine error code E31? ▼
Start by checking the pressure hose and sensor connector with the washer unplugged. If the hose is clear and the sensor still reads incorrectly, replace the pressure sensor or have it tested.
Is it safe to use my Frigidaire Washing Machine with error code E31? ▼
Avoid repeated washes if the water level is acting unpredictably. A bad pressure sensor can cause fill or drain problems.