Bosch
SHX78CC5UC
Dishwasher
Bosch SHX78CC5UC — Error Code E25
Bosch SHX78CC5UC error code E25: Drain pump blocked — check filter and pump.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Bosch Dishwasher error code E25 guide →
Repair guidance: the symptoms and steps below come from the canonical Bosch Dishwasher E25 guide and apply to SHX78CC5UC unless your manual says otherwise.
Symptoms on SHX78CC5UC
- ⚠️ Standing water in bottom after cycle
- ⚠️ Machine won't finish
- ⚠️ Wet dishes
How to Fix Error E25 on SHX78CC5UC
- 1 Unplug the dishwasher for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 Check and clean the drain pump filter (usually behind a small door at the bottom front)
- 3 Inspect the drain hose for kinks, blockages, or improper height
- 4 Test the drain pump — if it hums but won't move water, replace it ($50–$120 part)
- 5 Check door seal for debris or warping preventing full closure
🛠️ You'll need: Screwdriver set, Bucket, Wet/dry vacuum
· Time: 20–45 min
Questions People Also Ask for Error E25
What does E25 mean on a Bosch dishwasher? ▼
Error code E25 on a Bosch Dishwasher means: Drain pump blocked — check filter and pump. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How to fix Bosch dishwasher error code E25? ▼
First, unplug the dishwasher for 60 seconds to reset the control board. If error E25 returns, the root cause (drain pump blocked — check filter and pump) needs to be addressed — check connections, filters, and hoses before calling a technician.
What are the common causes of the E25 code? ▼
The E25 error is caused by a blocked drain pump or drain hose. Common culprits: debris in the filter, kinked drain hose, improper hose height, or a failing drain pump motor. Start by cleaning the filter and inspecting the hose.
Is it safe to use my Bosch Dishwasher with error code E25? ▼
It depends on the cause. Most E25 errors mean the appliance has stopped itself as a safety measure. Standing water indicates a drainage problem — avoid using until fixed to prevent mold and water damage.