🔍
Bosch Dishwasher ✅ Safe for Now

Bosch Dishwasher Error Code E25

Bosch Dishwasher error code E25: Drain pump blocked — check filter and pump.

Last reviewed: Last updated:

Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?
✅ No — safe for now
Safe to leave off. Fix soon — water backup can cause mold or floor damage.
Can I fix it myself?
DIY Possible
Part: Drain pump / drain hose / filter
How much will it cost?
DIY: $0–$150 (pump or hose)
Technician: $100–$300
⏱ 20–45 min

What Does Error E25 Mean on Your Bosch Dishwasher?

Bosch Dishwasher error code E25: Drain pump blocked — check filter and pump.

What typically fails: Drain pump / drain hose / filter

What You're Probably Seeing

How to Fix It Yourself

  1. 1 Unplug the dishwasher for 60 seconds then plug back in — this resets the control board and clears many temporary faults
  2. 2 Check and clean the drain pump filter (usually behind a small door at the bottom front)
  3. 3 Inspect the drain hose for kinks, blockages, or improper height
  4. 4 Test the drain pump — if it hums but won't move water, replace it ($50–$120 part)
  5. 5 Check door seal for debris or warping preventing full closure
🛠️ You'll need: Screwdriver set, Bucket, Wet/dry vacuum · Time: 20–45 min
💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does E25 mean on a Bosch dishwasher? ▼
Error code E25 on a Bosch Dishwasher means: Drain pump blocked — check filter and pump. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How to fix Bosch dishwasher error code E25? ▼
First, unplug the dishwasher for 60 seconds to reset the control board. If error E25 returns, the root cause (drain pump blocked — check filter and pump) needs to be addressed — check connections, filters, and hoses before calling a technician.
What are the common causes of the E25 code? ▼
The E25 error is caused by a blocked drain pump or drain hose. Common culprits: debris in the filter, kinked drain hose, improper hose height, or a failing drain pump motor. Start by cleaning the filter and inspecting the hose.
Is it safe to use my Bosch Dishwasher with error code E25? ▼
It depends on the cause. Most E25 errors mean the appliance has stopped itself as a safety measure. Standing water indicates a drainage problem — avoid using until fixed to prevent mold and water damage.

More Bosch Dishwasher Codes

All Bosch dishwasher error codes → All Bosch appliance codes →

Was this page helpful?

Rate the helpfulness of this page