Trane
-
✅ Safe to Use
Trane - Error Code 132
Trane Furnace error code 132: Liquid temperature sensor fault.
Is it safe?
✅ Safe temporarily
Safe to use briefly. A faulty sensor causes poor performance but rarely immediate danger.
Can I fix it?
DIY Possible
Tools: Multimeter, Screwdriver set
Repair cost
DIY: $10–$60 (sensor)
Pro: $80–$250
⏱ 20–45 min
What Does Error Code 132 Mean?
Trane Furnace error code 132: Liquid temperature sensor fault.
Part that typically fails: Temperature sensor / thermistor
Safe to use briefly. A faulty sensor causes poor performance but rarely immediate danger.
Symptoms You May Notice
- ⚠️ Furnace overheating and shutting off
- ⚠️ Short cycling
- ⚠️ Limit switch fault
How to Fix It Yourself
- 1 Check your owner's manual for model-specific guidance on error code reset procedures
- 2 Test the temperature sensor with a multimeter — replace if reading is outside spec
- 3 Inspect sensor wiring harness for damage or loose connections
- 4 If the error persists after reset and basic checks, contact a qualified technician
🛠️ Tools needed: Multimeter, Screwdriver set
· Time: 20–45 min
⚡ Quick tip: Always try a full power reset first — turn the unit off at the breaker, wait 30 seconds, restore power.
Frequently Asked Questions
What does Trane Furnace error code 132 mean? ▼
Error code 132 on a Trane gas furnace indicates: Liquid temperature sensor fault. The unit has detected this condition and has limited or stopped operation to prevent further damage.
How do I fix Trane Furnace error code 132? ▼
Start by powering the unit off for 30 seconds and restarting. If error 132 returns, the underlying cause (liquid temperature sensor fault) needs to be addressed. Check wiring connections and filters first before replacing components.
Is Trane error code 132 serious? ▼
It depends on the root cause. Some 132 errors resolve with a reset. Others indicate a failed component that requires professional repair. Don't continue operating with this error — it can lead to further damage.