Lennox
-
✅ Safe to Use
Lennox - Error Code 260
Lennox Heat Pump error code 260: Inducer motor fault.
Is it safe?
✅ Safe temporarily
Safe to leave off. Fix soon — water backup can cause mold or floor damage.
Can I fix it?
DIY Possible
Tools: Screwdriver set, Bucket, Wet/dry vacuum
Repair cost
DIY: $0–$150 (pump or hose)
Pro: $100–$300
⏱ 20–45 min
What Does Error Code 260 Mean?
Lennox Heat Pump error code 260: Inducer motor fault.
Part that typically fails: Drain pump / drain hose / filter
Safe to leave off. Fix soon — water backup can cause mold or floor damage.
Symptoms You May Notice
- ⚠️ Reduced airflow
- ⚠️ Outdoor fan not spinning
- ⚠️ Unusual noise
How to Fix It Yourself
- 1 Check your owner's manual for model-specific guidance on error code reset procedures
- 2 Check for debris obstructing the fan blades on indoor or outdoor unit
- 3 A technician should test motor windings and run capacitor — replace if failed
- 4 If the error persists after reset and basic checks, contact a qualified technician
🛠️ Tools needed: Screwdriver set, Bucket, Wet/dry vacuum
· Time: 20–45 min
⚡ Quick tip: Always try a full power reset first — turn the unit off at the breaker, wait 30 seconds, restore power.
Frequently Asked Questions
What does Lennox Heat Pump error code 260 mean? ▼
Error code 260 on a Lennox heat pump indicates: Inducer motor fault. The unit has detected this condition and has limited or stopped operation to prevent further damage.
How do I fix Lennox Heat Pump error code 260? ▼
Start by powering the unit off for 30 seconds and restarting. If error 260 returns, the underlying cause (inducer motor fault) needs to be addressed. Check wiring connections and filters first before replacing components.
Is Lennox error code 260 serious? ▼
It depends on the root cause. Some 260 errors resolve with a reset. Others indicate a failed component that requires professional repair. Don't continue operating with this error — it can lead to further damage.