Goodman / Amana
-
⚠️ Use With Caution
Goodman / Amana - Error Code E6
Goodman / Amana Furnace error code E6: Compressor overcurrent protection.
Is it safe?
⚠️ Use with caution
Stop using until repaired — running with a failing compressor causes further damage.
Can I fix it?
Technician Required
Repair cost
Pro: $800–$2,500
⏱ 3–6 hours (pro)
What Does Error Code E6 Mean?
Goodman / Amana Furnace error code E6: Compressor overcurrent protection.
Part that typically fails: Compressor
Stop using until repaired — running with a failing compressor causes further damage.
Symptoms You May Notice
- ⚠️ Error code flashing on furnace board
- ⚠️ No heat
- ⚠️ Furnace cycling on and off
What the Technician Will Do
🔧 Professional repair required. Do not attempt DIY — this repair requires specialized tools or certification.
- 1 Check your owner's manual for model-specific guidance on error code reset procedures
- 2 If the error persists after reset and basic checks, contact a qualified technician
⚡ Quick tip: Always try a full power reset first — turn the unit off at the breaker, wait 30 seconds, restore power.
Frequently Asked Questions
What does Goodman / Amana Furnace error code E6 mean? ▼
Error code E6 on a Goodman / Amana gas furnace indicates: Compressor overcurrent protection. The unit has detected this condition and has limited or stopped operation to prevent further damage.
How do I fix Goodman / Amana Furnace error code E6? ▼
Start by powering the unit off for 30 seconds and restarting. If error E6 returns, the underlying cause (compressor overcurrent protection) needs to be addressed. Check wiring connections and filters first before replacing components.
Is Goodman / Amana error code E6 serious? ▼
It depends on the root cause. Some E6 errors resolve with a reset. Others indicate a failed component that requires professional repair. Don't continue operating with this error — it can lead to further damage.