P2E17 — Intermediate Shaft Selection Actuator Position Sensor Circuit Low

What Does P2E17 Mean?

P2E17 is a diagnostic trouble code indicating: Intermediate Shaft Selection Actuator Position Sensor Circuit Low. This code relates to the vehicle systems system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.

Symptoms of P2E17

⚠️ Check Engine Light (MIL) illuminated
⚠️ Intermediate Shaft Selection Actuator Position Sensor reading at zero or minimum value
⚠️ Related system not functioning or in fail-safe mode
⚠️ System warning light illuminated

Common Causes

🔍 Open or broken wire in Intermediate Shaft Selection Actuator Position Sensor circuit
🔍 Poor ground connection at Intermediate Shaft Selection Actuator Position Sensor
🔍 Faulty Intermediate Shaft Selection Actuator Position Sensor with no output signal
🔍 Disconnected or loose Intermediate Shaft Selection Actuator Position Sensor connector
🔍 Blown fuse in related circuit

Frequently Asked Questions

What does P2E17 mean?

P2E17 indicates: Intermediate Shaft Selection Actuator Position Sensor Circuit Low. The vehicle's computer has detected that the Intermediate Shaft Selection Actuator Position Sensor is not operating within its expected parameters and stored this diagnostic trouble code.

Can I drive with code P2E17?

You can drive short distances for essential trips, but schedule a diagnosis soon. Driving with P2E17 for extended periods may cause additional problems.

How much does it cost to fix P2E17?

Repair costs for P2E17 typically range from $20 to $300, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80–$150 at most shops) will identify the exact cause before committing to expensive parts.

What To Do Next

Possible Fixes

🔧 Repair broken wire or restore ground in Intermediate Shaft Selection Actuator Position Sensor circuit
🔧 Clean and secure Intermediate Shaft Selection Actuator Position Sensor connector and ground points
🔧 Replace failed Intermediate Shaft Selection Actuator Position Sensor

1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.

P2E17: Intermediate Shaft Selection Actuator Position Sensor Circuit Low