P2843: Shift Fork D Position Circuit High
Severity
Medium
System
Powertrain
What Does P2843 Mean?
P2843 is a diagnostic trouble code indicating: Shift Fork D Position Circuit High. This code relates to the powertrain system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.
Symptoms of P2843
- β οΈ Check Engine Light (MIL) illuminated
- β οΈ Shift Fork D Position reading stuck at maximum value
- β οΈ Related system operating erratically or in default mode
- β οΈ Reduced engine performance
Common Causes
- π Short to voltage in Shift Fork D Position wiring harness
- π Corroded or water-damaged Shift Fork D Position connector
- π Faulty Shift Fork D Position outputting maximum voltage
- π Damaged wiring rubbing against metal components
- π ECM/PCM internal fault (rare)
Frequently Asked Questions
What does P2843 mean?
P2843 indicates: Shift Fork D Position Circuit High. The vehicle's computer has detected that the Shift Fork D Position is not operating within its expected parameters and stored this diagnostic trouble code.
Can I drive with code P2843?
You can drive short distances for essential trips, but schedule a diagnosis soon. Driving with P2843 for extended periods may cause additional problems.
How much does it cost to fix P2843?
Repair costs for P2843 typically range from $20 to $300, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80β$150 at most shops) will identify the exact cause before committing to expensive parts.
What To Do Next
Possible Fixes
- π§ Inspect and repair Shift Fork D Position wiring for short to voltage
- π§ Clean or replace corroded Shift Fork D Position connector
- π§ Replace faulty Shift Fork D Position
-
1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
-
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
-
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50β$150) pinpoints the root cause.
Related Codes
P2800
Transmission Range Sensor B Circuit (PRNDL Input)
P2801
Transmission Range Sensor B Circuit Range/Performance
P2802
Transmission Range Sensor B Circuit Low
P2803
Transmission Range Sensor B Circuit High
P2804
Transmission Range Sensor B Circuit Intermittent
P2805
Transmission Range Sensor A/B Correlation
P2806
Transmission Range Sensor Alignment
P2807
Pressure Control Solenoid G
P2808
Pressure Control Solenoid G Performance/Stuck Off
P2809
Pressure Control Solenoid G Stuck On