πŸ”

P1598: A/C Pressure Sensor Voltage Too High

DODGE JEEP PLYMOUTH PONTIAC
Severity
Medium
System
Manufacturer-Specific Powertrain

What Does P1598 Mean?

P1598 is a manufacturer-specific diagnostic trouble code: A/C Pressure Sensor Voltage Too High. This code applies to DODGE, JEEP, PLYMOUTH, PONTIAC vehicles. Unlike generic OBD-II codes, manufacturer-specific codes are defined by the vehicle maker and may only apply to certain makes and models.

Symptoms of P1598

Common Causes

Frequently Asked Questions

What does P1598 mean?
P1598 indicates: A/C Pressure Sensor Voltage Too High. The vehicle's computer has detected that the A/C Pressure Sensor Voltage Too High is not operating within its expected parameters and stored this diagnostic trouble code.
Can I drive with code P1598?
You can drive short distances for essential trips, but schedule a diagnosis soon. Driving with P1598 for extended periods may cause additional problems.
How much does it cost to fix P1598?
Repair costs for P1598 typically range from $80 to $300, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80–$150 at most shops) will identify the exact cause before committing to expensive parts.

What To Do Next

Possible Fixes

  • πŸ”§ Inspect A/C Pressure Sensor Voltage Too High and related wiring
  • πŸ”§ Replace faulty A/C Pressure Sensor Voltage Too High
  1. 1
    Find your vehicle above

    Click your make and model for real owner reports and common causes specific to your vehicle.

  2. 2
    Check for recalls

    Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.

  3. 3
    Get a professional diagnosis

    A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.

Related Codes