P1590 — Neutral Position Switch Circuit High Input

What Does P1590 Mean?

P1590 is a manufacturer-specific diagnostic trouble code: Neutral Position Switch Circuit High Input. This code applies to SUBARU vehicles. Unlike generic OBD-II codes, manufacturer-specific codes are defined by the vehicle maker and may only apply to certain makes and models.

Symptoms of P1590

⚠️ Check Engine Light (MIL) illuminated
⚠️ Neutral Position Switch reading stuck at maximum value
⚠️ Related system operating erratically or in default mode
⚠️ Reduced engine performance

Common Causes

🔍 Short to voltage in Neutral Position Switch wiring harness
🔍 Corroded or water-damaged Neutral Position Switch connector
🔍 Faulty Neutral Position Switch outputting maximum voltage
🔍 Damaged wiring rubbing against metal components
🔍 ECM/PCM internal fault (rare)

Frequently Asked Questions

What does P1590 mean?

P1590 indicates: Neutral Position Switch Circuit High Input. The vehicle's computer has detected that the Neutral Position Switch is not operating within its expected parameters and stored this diagnostic trouble code.

Can I drive with code P1590?

You can drive short distances for essential trips, but schedule a diagnosis soon. Driving with P1590 for extended periods may cause additional problems.

How much does it cost to fix P1590?

Repair costs for P1590 typically range from $20 to $300, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80–$150 at most shops) will identify the exact cause before committing to expensive parts.

What To Do Next

Possible Fixes

🔧 Inspect and repair Neutral Position Switch wiring for short to voltage
🔧 Clean or replace corroded Neutral Position Switch connector
🔧 Replace faulty Neutral Position Switch

1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.

P1590: Neutral Position Switch Circuit High Input