P1344 — Misfire During Start Cylinder 2

What Does P1344 Mean?

P1344 is a manufacturer-specific diagnostic trouble code: Misfire During Start Cylinder 2. This code applies to BMW vehicles. Unlike generic OBD-II codes, manufacturer-specific codes are defined by the vehicle maker and may only apply to certain makes and models.

Symptoms of P1344

⚠️ Check Engine Light (MIL) illuminated
⚠️ Misfire During Start Cylinder 2 not functioning as expected
⚠️ Related system may be in fail-safe mode
⚠️ Reduced engine performance

Common Causes

🔍 Faulty Misfire During Start Cylinder 2
🔍 Wiring or connector issue in Misfire During Start Cylinder 2 circuit
🔍 Related mechanical or electrical fault
🔍 ECM/PCM issue (rare)

Frequently Asked Questions

What does P1344 mean?

P1344 indicates: Misfire During Start Cylinder 2. The vehicle's computer has detected that the Misfire During Start Cylinder 2 is not operating within its expected parameters and stored this diagnostic trouble code.

Can I drive with code P1344?

You can drive short distances for essential trips, but schedule a diagnosis soon. Driving with P1344 for extended periods may cause additional problems.

How much does it cost to fix P1344?

Repair costs for P1344 typically range from $80 to $300, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80–$150 at most shops) will identify the exact cause before committing to expensive parts.

What To Do Next

Possible Fixes

🔧 Inspect Misfire During Start Cylinder 2 and related wiring
🔧 Replace faulty Misfire During Start Cylinder 2

1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.

P1344: Misfire During Start Cylinder 2