P1330: Cylinder 6 Knock Control Limit Attained
VOLKSWAGEN
LEXUS
Severity
Medium
System
Manufacturer-Specific Powertrain
What Does P1330 Mean?
P1330 is a manufacturer-specific diagnostic trouble code: Cylinder 6 Knock Control Limit Attained. This code applies to VOLKSWAGEN, LEXUS vehicles. Unlike generic OBD-II codes, manufacturer-specific codes are defined by the vehicle maker and may only apply to certain makes and models.
Symptoms of P1330
- β οΈ Check Engine Light (MIL) illuminated
- β οΈ Cylinder 6 Knock Control Limit Attained not functioning as expected
- β οΈ Related system may be in fail-safe mode
- β οΈ Reduced engine performance
Common Causes
- π Faulty Cylinder 6 Knock Control Limit Attained
- π Wiring or connector issue in Cylinder 6 Knock Control Limit Attained circuit
- π Related mechanical or electrical fault
- π ECM/PCM issue (rare)
Frequently Asked Questions
What does P1330 mean?
P1330 indicates: Cylinder 6 Knock Control Limit Attained. The vehicle's computer has detected that the Cylinder 6 Knock Control Limit Attained is not operating within its expected parameters and stored this diagnostic trouble code.
Can I drive with code P1330?
You can drive short distances for essential trips, but schedule a diagnosis soon. Driving with P1330 for extended periods may cause additional problems.
How much does it cost to fix P1330?
Repair costs for P1330 typically range from $80 to $300, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80β$150 at most shops) will identify the exact cause before committing to expensive parts.
What To Do Next
Possible Fixes
- π§ Inspect Cylinder 6 Knock Control Limit Attained and related wiring
- π§ Replace faulty Cylinder 6 Knock Control Limit Attained
-
1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
-
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
-
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50β$150) pinpoints the root cause.
Related Codes
P1300
Igniter Circuit Malfunction Bank 1 Or No 1
P1301
Fire Due To Increased Exhaust Temperature
P1302
Boost Calibration Low
P1303
EGR Calibration Fault
P1304
EGR Calibration High
P1305
Igniter Circuit Malfunction Bank 2 Or No 2
P1306
Kickdown Relay Pull - In Circuit Fault
P1307
Chassis Acceleration Sensor Signal Malfunction
P1308
Chassis Acceleration Sensor Signal Low
P1309
Chassis Acceleration Sensor Signal High