πŸ”

P0760: Shift Solenoid C

Severity
High
NHTSA Reports
2
Vehicles Affected
2
System
Powertrain

What Does P0760 Mean?

P0760 is a diagnostic trouble code indicating: Shift Solenoid C. This code relates to the transmission system. It has been reported in NHTSA complaints across 2 different vehicle models.

The automatic transmission is controlled by the TCM using input from speed sensors, temperature sensors, and pressure sensors. When the TCM detects a fault, it may activate limp mode (2nd or 3rd gear only). Shift solenoids are electromagnetic valves inside the valve body controlling hydraulic fluid flow. Modern transmissions use 4-8 solenoids in combination for each gear. Solenoid failures are often caused by contaminated fluid β€” worn clutch material and degraded fluid create varnish that sticks solenoids. Always check transmission fluid first: level, color (red/pink good, brown/black bad), and smell (burnt = internal damage). Transmission DTCs escalate fast β€” a $200 solenoid fix can become a $3000-$5000 rebuild if ignored.

Symptoms of P0760

Common Causes

P0760 Reports by Year

2021
1
2016
1

Real Owner Reports

From NHTSA complaint database β€” actual owner descriptions.

"replacement transmission, the car jumps when driving with a foul burning odor and it sounds like a lawnmower when taking my feet off the gas to slow the vehicle down the car speeds up, the transmission light is still on, the problem has gotten worst, the component has not been inspected, the first t"

β€” Dodge Journey owner, 10/02/2021

"2010 DODGE AVENGER STX 4 CY. AT ABOUT 64,000 CHECK ENGINE LIGHT CAME ON WITH CODES P0700 AND P0760. HAD TRANSMISSION OVERHAULED. CHANGED FLUID FILTERS ETC. WAS DRIVING VEH WITH ODOMETER AT APPROX 101,000 MILES WHILE DRIVING AT APPROX 35 MPH. VEH ALL OF A SUDDEN STARTED AS IF ENGINE WAS RACING OR EX"

β€” Dodge Avenger owner, 03/10/2016

Source: NHTSA Complaints Database

Most Reported Vehicles for P0760

Based on NHTSA owner complaint data.

# Vehicle Reports
1 DODGE JOURNEY
2 DODGE AVENGER

Diagnostic Tips

  1. Check fluid level and condition FIRST
  2. Multiple codes suggest valve body or internal damage
  3. Monitor solenoid duty cycle with scan tool
  4. Solenoids often accessible by removing pan

Common Mistakes to Avoid

Frequently Asked Questions

What is a shift solenoid?
Electromagnetic valve controlling hydraulic fluid flow for gear selection. Modern transmissions have 4-8 solenoids.
Can I drive in limp mode?
Only to a repair facility. Limp mode prevents damage but causes excessive heat with extended use.
How much for solenoid replacement?
Individual: $15-$100 parts. Packs: $50-$300. Labor: $150-$400. Total: $200-$700.
Can fluid change fix it?
Sometimes. If solenoid sticks from contaminated fluid, fresh manufacturer fluid resolves ~30-40% of cases.

What To Do Next

Possible Fixes

  • πŸ”§ Replace shift solenoid or pack
  • πŸ”§ Transmission fluid flush with manufacturer fluid
  • πŸ”§ Repair wiring to transmission
  • πŸ”§ Replace valve body
  1. 1
    Find your vehicle above

    Click your make and model for real owner reports and common causes specific to your vehicle.

  2. 2
    Check for recalls

    Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.

  3. 3
    Get a professional diagnosis

    A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.

Related Codes