P0723 — Output Shaft Speed Sensor Circuit Intermittent

What Does P0723 Mean?

P0723 is a diagnostic trouble code indicating: Output Shaft Speed Sensor Circuit Intermittent. This code relates to the transmission system. It has been reported in NHTSA complaints across 1 different vehicle models.

The automatic transmission is controlled by the TCM using input from speed sensors, temperature sensors, and pressure sensors. When the TCM detects a fault, it may activate limp mode (2nd or 3rd gear only). Shift solenoids are electromagnetic valves inside the valve body controlling hydraulic fluid flow. Modern transmissions use 4-8 solenoids in combination for each gear. Solenoid failures are often caused by contaminated fluid — worn clutch material and degraded fluid create varnish that sticks solenoids. Always check transmission fluid first: level, color (red/pink good, brown/black bad), and smell (burnt = internal damage). Transmission DTCs escalate fast — a $200 solenoid fix can become a $3000-$5000 rebuild if ignored.

Symptoms of P0723

⚠️ Check engine/transmission warning light on
⚠️ Harsh, delayed, or erratic shifting
⚠️ Transmission stuck in one gear (limp mode)
⚠️ No upshift or no downshift
⚠️ Transmission slipping
⚠️ RPM flares between shifts

Common Causes

🔍 Faulty shift solenoid
🔍 Contaminated transmission fluid
🔍 Wiring issue between TCM and solenoid
🔍 Valve body wear
🔍 TCM internal failure

Real Owner Reports

From NHTSA complaint database — actual owner descriptions.

"I HAVE HAD NUMEROUS ISSUES WITH THIS VEHICLE, WITH TODAY ENDING IN LOSS OF POWER WHILE DOING 70MPH ON INTERSTATE 95N. PRIOR TO THIS ISSUE, MY DASHBOARD AND RADIO WOULD FLICKER ON AND OFF, THEN THE MESSAGE "SERVICE STABILITRAK" WOULD POP UP AND GO AWAY. THIS MORNING WHILE DRIVING ON 95N MY VEHICLE L"
— Chevrolet Cruze owner, 06/06/2017

Source: NHTSA Complaints Database

Most Reported Vehicles for P0723

Based on NHTSA owner complaint data.

#	Vehicle	Reports
1	CHEVROLET CRUZE

Diagnostic Tips

Check fluid level and condition FIRST
Multiple codes suggest valve body or internal damage
Monitor solenoid duty cycle with scan tool
Solenoids often accessible by removing pan

Common Mistakes to Avoid

❌ Replacing solenoid without flushing contaminated fluid
❌ Using aftermarket fluid instead of manufacturer-specified
❌ Driving in limp mode for extended periods

Frequently Asked Questions

What is a shift solenoid?

Electromagnetic valve controlling hydraulic fluid flow for gear selection. Modern transmissions have 4-8 solenoids.

Can I drive in limp mode?

Only to a repair facility. Limp mode prevents damage but causes excessive heat with extended use.

How much for solenoid replacement?

Individual: $15-$100 parts. Packs: $50-$300. Labor: $150-$400. Total: $200-$700.

Can fluid change fix it?

Sometimes. If solenoid sticks from contaminated fluid, fresh manufacturer fluid resolves ~30-40% of cases.

What To Do Next

Possible Fixes

🔧 Replace shift solenoid or pack
🔧 Transmission fluid flush with manufacturer fluid
🔧 Repair wiring to transmission
🔧 Replace valve body

1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.

P0723: Output Shaft Speed Sensor Circuit Intermittent