P06AD: Control Module Internal Temperature Sensor B Circuit Low
Severity
Medium
System
Computer and Output Circuits
What Does P06AD Mean?
P06AD is a diagnostic trouble code indicating: Control Module Internal Temperature Sensor B Circuit Low. This code relates to the computer and output circuits system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.
Symptoms of P06AD
- β οΈ Check Engine Light (MIL) illuminated
- β οΈ Control Module Internal Temperature Sensor B reading at zero or minimum value
- β οΈ Related system not functioning or in fail-safe mode
- β οΈ Multiple system malfunctions
Common Causes
- π Open or broken wire in Control Module Internal Temperature Sensor B circuit
- π Poor ground connection at Control Module Internal Temperature Sensor B
- π Faulty Control Module Internal Temperature Sensor B with no output signal
- π Disconnected or loose Control Module Internal Temperature Sensor B connector
- π Blown fuse in related circuit
Frequently Asked Questions
What does P06AD mean?
P06AD indicates: Control Module Internal Temperature Sensor B Circuit Low. The vehicle's computer has detected that the Control Module Internal Temperature Sensor B is not operating within its expected parameters and stored this diagnostic trouble code.
Can I drive with code P06AD?
You can drive short distances for essential trips, but schedule a diagnosis soon. Driving with P06AD for extended periods may cause additional problems.
How much does it cost to fix P06AD?
Repair costs for P06AD typically range from $20 to $300, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80β$150 at most shops) will identify the exact cause before committing to expensive parts.
What To Do Next
Possible Fixes
- π§ Repair broken wire or restore ground in Control Module Internal Temperature Sensor B circuit
- π§ Clean and secure Control Module Internal Temperature Sensor B connector and ground points
- π§ Replace failed Control Module Internal Temperature Sensor B
-
1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
-
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
-
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50β$150) pinpoints the root cause.
Related Codes
P0600
Serial Communication Link
P0601
Internal Control Module Memory Checksum Error
P0602
Control Module Programming Error
P0603
Internal Control Module Keep Alive Memory (KAM) Error
P0604
Internal Control Module RAM Error
P0605
Internal Control Module Read Only Memory (ROM) Error
P0606
Control Module Processor
P0607
Control Module Performance
P0608
Control Module VSS Output A
P0609
Control Module VSS Output B