P069B: Cylinder 9 Glow Plug Control Circuit High
Severity
Medium
System
Computer and Output Circuits
What Does P069B Mean?
P069B is a diagnostic trouble code indicating: Cylinder 9 Glow Plug Control Circuit High. This code relates to the computer and output circuits system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.
Symptoms of P069B
- ⚠️ Check Engine Light (MIL) illuminated
- ⚠️ Cylinder 9 Glow Plug reading stuck at maximum value
- ⚠️ Related system operating erratically or in default mode
- ⚠️ Multiple system malfunctions
Common Causes
- 🔍 Short to voltage in Cylinder 9 Glow Plug wiring harness
- 🔍 Corroded or water-damaged Cylinder 9 Glow Plug connector
- 🔍 Faulty Cylinder 9 Glow Plug outputting maximum voltage
- 🔍 Damaged wiring rubbing against metal components
- 🔍 ECM/PCM internal fault (rare)
Frequently Asked Questions
What does P069B mean?
P069B indicates: Cylinder 9 Glow Plug Control Circuit High. The vehicle's computer has detected that the Cylinder 9 Glow Plug is not operating within its expected parameters and stored this diagnostic trouble code.
Can I drive with code P069B?
You can drive short distances for essential trips, but schedule a diagnosis soon. Driving with P069B for extended periods may cause additional problems.
How much does it cost to fix P069B?
Repair costs for P069B typically range from $20 to $300, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80–$150 at most shops) will identify the exact cause before committing to expensive parts.
What To Do Next
Possible Fixes
- 🔧 Inspect and repair Cylinder 9 Glow Plug wiring for short to voltage
- 🔧 Clean or replace corroded Cylinder 9 Glow Plug connector
- 🔧 Replace faulty Cylinder 9 Glow Plug
-
1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
-
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
-
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.
Related Codes
P0600
Serial Communication Link
P0601
Internal Control Module Memory Checksum Error
P0602
Control Module Programming Error
P0603
Internal Control Module Keep Alive Memory (KAM) Error
P0604
Internal Control Module RAM Error
P0605
Internal Control Module Read Only Memory (ROM) Error
P0606
Control Module Processor
P0607
Control Module Performance
P0608
Control Module VSS Output A
P0609
Control Module VSS Output B