P0658: Actuator Supply Voltage A Circuit Low
What Does P0658 Mean?
P0658 is a diagnostic trouble code indicating: Actuator Supply Voltage A Circuit Low. This code relates to the computer and output circuits system. It has been reported in NHTSA complaints across 1 different vehicle models.
The Engine Control Module (ECM) or Powertrain Control Module (PCM) is the central computer managing all engine functions. It processes data from dozens of sensors and controls fuel injectors, ignition coils, VVT solenoids, EGR, EVAP purge, and more. P06xx codes indicate problems within the ECM itself or its internal circuits — these can affect multiple systems simultaneously. Common causes include voltage supply problems (low battery, bad alternator, corroded grounds), software glitches requiring reflash, water intrusion, or genuine internal ECM failure. Before condemning the ECM, ALWAYS verify power, ground, and reference voltage circuits — 90% of suspected ECM failures are wiring or power supply issues. ECM replacement is expensive ($500-$2000+) and requires VIN-specific programming.
Symptoms of P0658
- ⚠️ Check engine light (possibly multiple warning lights)
- ⚠️ Multiple unrelated codes stored simultaneously
- ⚠️ Intermittent no-start or stalling
- ⚠️ Erratic engine behavior
- ⚠️ Loss of specific functions (A/C, fans, etc.)
- ⚠️ Vehicle may enter limp mode
Common Causes
- 🔍 Low battery voltage or failing alternator
- 🔍 Corroded or loose ECM ground connections
- 🔍 Water intrusion into ECM housing
- 🔍 ECM software requiring reflash/update
- 🔍 Internal ECM component failure
Real Owner Reports
From NHTSA complaint database — actual owner descriptions.
"I was driving the vehicle up a mountain, in a 70m speed zone, when the dash board lit up. The vehicle started to decelerate, I pushed the gas petal but it just decelerated. I put on the emergency light and continued to the exit. Stopping in Liberty Pa, at an Exxon station. Called GM roadside assista"
— Chevrolet Colorado owner, 05/19/2024
Source: NHTSA Complaints Database
Most Reported Vehicles for P0658
Based on NHTSA owner complaint data.
| # | Vehicle | Reports |
|---|---|---|
| 1 | CHEVROLET COLORADO |
Diagnostic Tips
- CHECK BATTERY VOLTAGE FIRST — weak battery causes most P06xx codes
- Inspect ALL ECM ground connections with voltage drop test (<0.1V)
- Check ECM connector for corrosion, bent pins, water intrusion
- Check for manufacturer TSBs — many have known software updates
Common Mistakes to Avoid
- ❌ Replacing ECM without checking power/ground circuits — $500-$2000 mistake
- ❌ Using junkyard ECM without reprogramming
- ❌ Ignoring weak battery as root cause
Frequently Asked Questions
Does the ECM really need replacement?
Can I use a junkyard ECM?
Can a dead battery cause ECM codes?
What To Do Next
Possible Fixes
- 🔧 Clean and tighten ECM grounds and power connections
- 🔧 Replace battery and/or alternator
- 🔧 ECM software reflash at dealer
- 🔧 Repair water intrusion — reseal ECM housing
- 🔧 Replace ECM/PCM (includes programming)
-
1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
-
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
-
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.