πŸ”

P0560: System Voltage

Severity
High
NHTSA Reports
1
Vehicles Affected
1
System
Powertrain

What Does P0560 Mean?

P0560 is a diagnostic trouble code indicating: System Voltage. This code relates to the vehicle speed and idle control system. It has been reported in NHTSA complaints across 1 different vehicle models.

The vehicle speed and idle control systems manage engine operation at rest and in motion. The Vehicle Speed Sensor (VSS) provides real-time speed data used for fuel calculations, shift timing, cruise control, ABS, and speedometer display. The Idle Air Control (IAC) system regulates airflow to maintain target idle speed (typically 600-900 RPM). On electronic throttle control vehicles, the ECM uses the throttle body motor directly. When the ECM detects faults in these systems, drivability problems like stalling, surging, incorrect speedometer readings, and cruise control failure are common. Speed sensor failures are often caused by metal debris from internal transmission wear accumulating on the magnetic sensor tip. Idle problems are most commonly caused by carbon buildup in the throttle body restricting airflow.

Symptoms of P0560

Common Causes

Real Owner Reports

From NHTSA complaint database β€” actual owner descriptions.

"WE HAVE HAD NOTHING BUT PROBLEMS WITH OUR 2011 HYUNDAI SONATA. LESS THAN A YEAR AGO OUR ENGINE COMPLETELY DIED WHILE DRIVING THE VEHICLE. THE DEALERSHIP REPLACED THE ENGINE AND SINCE THEN WE HAVE HAD STARTING AND ELECTRICAL PROBLEMS. WHEN WE WENT TO PICK UP THE CAR IT DIDN'T START RIGHT AWAY AND THE"

β€” Hyundai Sonata owner, 12/10/2018

Source: NHTSA Complaints Database

Most Reported Vehicles for P0560

Based on NHTSA owner complaint data.

# Vehicle Reports
1 HYUNDAI SONATA

Diagnostic Tips

  1. For speed sensor codes: check if speedometer works β€” if not, output speed sensor is likely bad
  2. For idle codes: clean throttle body first β€” carbon buildup is #1 cause
  3. Check for vacuum leaks with smoke machine
  4. On electronic throttle vehicles, throttle body relearn may be required after cleaning

Common Mistakes to Avoid

Frequently Asked Questions

Why does my car idle rough after cleaning throttle body?
The ECM learned to compensate for carbon buildup. After cleaning, it needs to relearn the new idle position. Drive 10-15 minutes with varied speeds or perform manufacturer relearn procedure.
Can a bad speed sensor cause transmission problems?
Yes. The TCM uses speed data for shift points. A faulty sensor causes harsh shifts, wrong gears, and limp mode.
How much does a speed sensor cost?
$20-$80 parts, usually externally mounted. Labor $50-$150. Total: $70-$230.

What To Do Next

Possible Fixes

  • πŸ”§ Replace vehicle speed sensor
  • πŸ”§ Clean throttle body
  • πŸ”§ Replace idle air control valve
  • πŸ”§ Repair vacuum leak
  • πŸ”§ Repair wiring/connector
  1. 1
    Find your vehicle above

    Click your make and model for real owner reports and common causes specific to your vehicle.

  2. 2
    Check for recalls

    Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.

  3. 3
    Get a professional diagnosis

    A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.

Related Codes