πŸ”

P0486: EGR Sensor B Circuit

Severity
Medium
NHTSA Reports
2
Vehicles Affected
2
System
Powertrain

What Does P0486 Mean?

P0486 is a diagnostic trouble code indicating: EGR Sensor B Circuit. This code relates to the emission controls system. It has been reported in NHTSA complaints across 2 different vehicle models.

The emission control system reduces harmful exhaust pollutants through several subsystems: EGR (Exhaust Gas Recirculation) recirculates a portion of exhaust back into the intake to lower combustion temperatures and reduce NOx. The secondary air injection system pumps fresh air into the exhaust during cold starts to help the catalytic converter light off faster. The catalytic converter converts CO, HC, and NOx into CO2, H2O, and N2. The EVAP system captures fuel vapors from the tank and purges them into the engine for combustion. When any of these systems malfunction, the vehicle will fail emissions testing and the ECM will set a DTC.

Symptoms of P0486

Common Causes

P0486 Reports by Year

2020
1
2016
1

Real Owner Reports

From NHTSA complaint database β€” actual owner descriptions.

"THE TRANSMISSION HAS HAD ONGOING ISSUES SINCE MANUFACTURED. NISSAN HAS KNOWN OF THE ISSUE BUT HAS MADE PATCH WORK OF THE ISSUE INSTEAD OF REPLACING THE TRANSMISSION. SINCE THE RECALL DEADLINE WAS MAY 9,2020 THEY ARE RECOMMENDING THE TRANSMISSION TO BE REPLACED BUT UNWILLING TO REPAIR IT UNDER THE RE"

β€” Nissan Versa owner, 04/10/2020

"STRONG SMELL OF GAS IN THE GARAGE AFTER SHUTTING JEEP OFF FOR PAST 3-4 YEARS. FUEL SPIT ISSUE RESOLVED WITH WARRANTY 12/2013. GAS SMELL AFTER SHUTTING JEEP OFF CONTINUED. 09/2014 DEALERSHIP PULLED CODE P0456, "VENT TUBE AT TANK BROKEN." PAID TO HAVE DEALERSHIP ORDER AND INSTALL A NEW TANK ONLY TO F"

β€” Jeep Wrangler owner, 07/21/2016

Source: NHTSA Complaints Database

Most Reported Vehicles for P0486

Based on NHTSA owner complaint data.

# Vehicle Reports
1 NISSAN VERSA
2 JEEP WRANGLER

Diagnostic Tips

  1. For EVAP codes: start with the gas cap β€” tighten it and clear the code. If it returns, use a smoke machine to find the leak
  2. For EGR codes: remove and inspect the EGR valve β€” carbon buildup causing sticking is extremely common and cleanable
  3. For catalyst codes: check upstream O2 sensor first β€” a bad sensor can falsely report low catalyst efficiency
  4. For secondary air codes: listen for the air pump running during cold start β€” it should run for 30-90 seconds

Common Mistakes to Avoid

Frequently Asked Questions

Will I pass emissions with a check engine light on?
No. In all US states that require emissions testing, a lit check engine light is an automatic failure regardless of actual tailpipe emissions. The code must be cleared AND the readiness monitors must complete before testing.
Can I just clear the code before emissions testing?
No. After clearing codes, the ECM's readiness monitors reset and must complete a full drive cycle before the vehicle can pass inspection. Most testing facilities check monitor status β€” incomplete monitors = automatic failure.
How much does a catalytic converter cost?
OEM: $500-$2500+ depending on vehicle. Aftermarket: $200-$800 but must be CARB-compliant in California and several other states. Labor: $100-$500. Some vehicles have 2-4 converters, so total costs can be significant.

What To Do Next

Possible Fixes

  • πŸ”§ Clean or replace EGR valve
  • πŸ”§ Replace gas cap (EVAP codes)
  • πŸ”§ Replace EVAP purge or vent solenoid
  • πŸ”§ Replace catalytic converter
  • πŸ”§ Replace secondary air pump or check valve
  1. 1
    Find your vehicle above

    Click your make and model for real owner reports and common causes specific to your vehicle.

  2. 2
    Check for recalls

    Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.

  3. 3
    Get a professional diagnosis

    A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.

Related Codes