P03FE: Ignition L Control Signal Circuit Low
Severity
High
System
Ignition System
What Does P03FE Mean?
P03FE is a diagnostic trouble code indicating: Ignition L Control Signal Circuit Low. This code relates to the ignition system system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.
Symptoms of P03FE
- β οΈ Check Engine Light (MIL) illuminated
- β οΈ Ignition L Control Signal reading at zero or minimum value
- β οΈ Related system not functioning or in fail-safe mode
- β οΈ Engine misfires or rough running
Common Causes
- π Open or broken wire in Ignition L Control Signal circuit
- π Poor ground connection at Ignition L Control Signal
- π Faulty Ignition L Control Signal with no output signal
- π Disconnected or loose Ignition L Control Signal connector
- π Blown fuse in related circuit
Frequently Asked Questions
What does P03FE mean?
P03FE indicates: Ignition L Control Signal Circuit Low. The vehicle's computer has detected that the Ignition L Control Signal is not operating within its expected parameters and stored this diagnostic trouble code.
Can I drive with code P03FE?
Only short distances if absolutely necessary. P03FE affects a critical system and should be diagnosed within a few days to avoid further damage.
How much does it cost to fix P03FE?
Repair costs for P03FE typically range from $20 to $300, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80β$150 at most shops) will identify the exact cause before committing to expensive parts.
What To Do Next
Possible Fixes
- π§ Repair broken wire or restore ground in Ignition L Control Signal circuit
- π§ Clean and secure Ignition L Control Signal connector and ground points
- π§ Replace failed Ignition L Control Signal
-
1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
-
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
-
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50β$150) pinpoints the root cause.
Related Codes
P0300
Random/Multiple Cylinder Misfire Detected
P0301
Cylinder 1 Misfire Detected
P0302
Cylinder 2 Misfire Detected
P0303
Cylinder 3 Misfire Detected
P0304
Cylinder 4 Misfire Detected
P0305
Cylinder 5 Misfire Detected
P0306
Cylinder 6 Misfire Detected
P0307
Cylinder 7 Misfire Detected
P0308
Cylinder 8 Misfire Detected
P0309
Cylinder 9 Misfire Detected