🔍
🟢

P0123 on Jeep Cherokee

Throttle/Pedal Position Sensor/Switch A Circuit High

NHTSA Reports
2
Severity
medium
Most Affected
2018, 2019
Crashes / Fires
0 / 0
Source: NHTSA Complaints Database · SAE J2012
Last reviewed: Last updated:

Methodology: Reviewed against the SAE J2012 generic DTC definition and NHTSA owner-complaint patterns, then scoped to Jeep Cherokee context without treating complaints as confirmed diagnoses.

Sources: SAE/OBD-II definitions, manufacturer service information, and public reliability reports (including NHTSA where applicable).

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

What P0123 Means on Your Jeep Cherokee

P0123 is a diagnostic trouble code indicating: Throttle/Pedal Position Sensor/Switch A Circuit High. This code relates to the fuel and air metering system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.

2 JEEP CHEROKEE owners have reported this issue to NHTSA across model years 2018-2019. Most reports come from the 2018, 2019 model years. The most commonly reported component is Electrical System,Engine,Fuel/Propulsion System (50.0% of reports).

Real Jeep Cherokee Owner Reports

Source: NHTSA Complaints Database

"Check engine light came on. Had it diagnosed within 5 minutes. Code P0123 came up. That is the “Throttle/Pedal Position Sensor/Switch “A” Circuit High Input”. Specific part # 5184349AF. It is built into the throttle body, so whole throttle body must be replaced. Vehicle only has 40,000 miles."

— 2019 Jeep Cherokee owner · POWER TRAIN,ENGINE,FUEL/PROPULSION SYSTEM · Filed 2021-07-20

All reports filed by vehicle owners directly with the U.S. Department of Transportation.

📊 Complaint Trend by Model Year

1
'18
1
'19

Common Causes on Jeep Cherokee

Based on NHTSA complaint component analysis for this vehicle.

ELECTRICAL SYSTEM,ENGINE,FUEL/PROPULSION SYSTEM 50%
POWER TRAIN,ENGINE,FUEL/PROPULSION SYSTEM 50%

What To Do Next

  1. 1
    Check for recalls on YOUR VIN

    Go to nhtsa.gov/recalls and enter your VIN. If your vehicle is covered, repairs are free.

  2. 2
    Get a proper diagnosis

    A code alone doesn't tell you the exact failed part. A diagnostic at a shop ($50–$150) pinpoints the root cause before you spend money on parts.

  3. 3
    Compare repair quotes

    Get 2–3 quotes. Dealer vs. independent shop prices often differ 30–50% for the same repair.

Frequently Asked Questions

P0123 on Other Vehicles