What does P0014 mean on a CHEVROLET EQUINOX?

P0014 indicates: B Camshaft Position - Timing Over-Advanced or System Performance Bank 1. This is a fuel and air metering code. 11 CHEVROLET EQUINOX owners have reported this to NHTSA.

What are the most common causes of P0014 on CHEVROLET EQUINOX?

Based on 11 NHTSA reports, the most commonly cited components are: Engine, Power Train,Engine, Engine,Visibility/Wiper. These percentages are based on the component field in owner complaints.

Is P0014 serious on my CHEVROLET EQUINOX?

Of 11 NHTSA reports for this code on CHEVROLET EQUINOX, none involved a crash or fire. However, any diagnostic code should be evaluated by a qualified mechanic.

What should I do if my CHEVROLET EQUINOX shows P0014?

1) Check for recalls on your VIN at nhtsa.gov/recalls. 2) Get a professional diagnosis — a code alone doesn't identify the exact failed part. 3) Get 2-3 repair estimates to compare.

P0014 on CHEVROLET EQUINOX — B Camshaft Position - Timing Over-Advanced or System Performance Bank 1

What P0014 Means on Your CHEVROLET EQUINOX

Real CHEVROLET EQUINOX Owner Reports (Source: NHTSA Complaints Database)

"Purchased car from toyota of rockwall in jan 2015. in july 2015 started having issues with shift not coming out of park, sometimes the problem would not duplicate, so i had to take it back to the shop multiple times. initially took car to stonebriar chevy (frisco, tx), who replaced the battery."

— 2010 CHEVROLET EQUINOX owner • ENGINE • Filed 11/03/2015

"Start-up noise coming from engine, sounds very similar to running a diesel. vehicle is experiencing rough idle, or near stalling/complete stall out at a low throttle opening. check engine light came on throwing codes p0014 and p0011."

— 2010 CHEVROLET EQUINOX owner • POWER TRAIN,ENGINE • Filed 03/18/2013

"Exhaust cam shaft solenoid valve replaced 3 times within 1 year. cam shaft intake accuator replaced 1 time. engine check light came on while traveling on freeway. error code p0014/p0013 confirmed by dealership at time of repairs. recently had front windshield wiper transmission failed."

— 2012 CHEVROLET EQUINOX owner • ENGINE,VISIBILITY/WIPER • Filed 12/01/2018

"2013 chevrolet equinox. check engine light illuminated. code p0014 code definition camshaft position 'b' - timing over-advanced or system performance (bank 1) replaced both intake and exhaust vvt. vehicle is losing about a quart of oil every 1000 miles. took to dealer. did a diagnostic."

— 2013 CHEVROLET EQUINOX owner • UNKNOWN OR OTHER,ENGINE,FUEL/PROPULSION SYSTEM • Filed 02/05/2021

"I bought this vehicle i'm march 2018. a few weeks after buying it the check engine light came on with the code p0014 for the camshaft position sensor. i took it back to the dealer who replaced the part and changed the oil and it was all fine, no more check engine light."

— 2013 CHEVROLET EQUINOX owner • UNKNOWN OR OTHER,ENGINE • Filed 03/11/2018

Data from NHTSA Vehicle Complaints Database. All reports are filed by vehicle owners directly with the U.S. Department of Transportation.

Common Causes of P0014 on CHEVROLET EQUINOX

54.5%

9.1%

Percentages based on NHTSA complaint component analysis for this vehicle.

Complaint Trend by Year

2010

2

2012

1

2013

2

2014

2

2015

1

2017

3

What To Do Next

1
Check for recalls on YOUR VIN
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if your vehicle is covered.
2
Get a proper diagnosis
A code alone doesn't tell you the exact failed part. A diagnostic at a shop ($50-$150) pinpoints the root cause before you spend money on parts.
3
Compare repair quotes
Get 2-3 quotes. Dealer vs independent shop prices often differ 30-50% for the same repair.

What P0014 Means on Your CHEVROLET EQUINOX

Real CHEVROLET EQUINOX Owner Reports (Source: NHTSA Complaints Database)

Common Causes of P0014 on CHEVROLET EQUINOX

Complaint Trend by Year

What To Do Next

P0014 on Other Vehicles