🔍
🟡

P0013 on CHEVROLET EQUINOX

B Camshaft Position Actuator A Control Circuit/Open Bank 1

NHTSA Reports
6
Severity
Medium
Most Affected
2012, 2011, 2014
Crashes / Fires
0 / 0
Source: NHTSA Complaints Database · SAE J2012
Last reviewed: Last updated:

Methodology: Reviewed against the SAE J2012 generic DTC definition and NHTSA owner-complaint patterns, then scoped to Chevrolet model context without treating complaints as confirmed diagnoses.

Sources: SAE/OBD-II definitions, manufacturer service information, and public reliability reports (including NHTSA where applicable).

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

What P0013 Means on Your CHEVROLET EQUINOX

P0013 is a diagnostic trouble code indicating: B Camshaft Position Actuator A Control Circuit/Open Bank 1. This code relates to the fuel and air metering system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.

6 CHEVROLET EQUINOX owners have reported this issue to NHTSA across model years 2011-2017. Most reports come from the 2012, 2011 model years. The most commonly reported component is Engine (50.0% of reports).

Real CHEVROLET EQUINOX Owner Reports

Source: NHTSA Complaints Database

"I bought this vehicle used and one month later ck engine light comes on and stays on while driving the type of roadway is either hwy. or in town at any speeds. had checked, trouble code p0013 cam act. sensor. found recall #11195a on line."

— 2011 CHEVROLET EQUINOX owner · ENGINE · Filed 2015-10-17

"Exhaust cam shaft solenoid valve replaced 3 times within 1 year. cam shaft intake accuator replaced 1 time. engine check light came on while traveling on freeway. error code p0014/p0013 confirmed by dealership at time of repairs. recently had front windshield wiper transmission failed."

— 2012 CHEVROLET EQUINOX owner · ENGINE,VISIBILITY/WIPER · Filed 2018-12-01

"When my vehicle is in motion i am not getting the amount of power i should be receiving once i press on the gas. i believe the timing is off and i have a code: p0013 issue, actuator circuit, cam shaft position."

— 2012 CHEVROLET EQUINOX owner · POWER TRAIN,ENGINE,FUEL/PROPULSION SYSTEM · Filed 2018-02-02

"Vehicle has 55000 miles and check engine light is on. in scanning the car i was told that p0010 the intake positions actuator circuit and p0013 exhaust camshaft position actuator circuit needed to be serviced to the tune of between 1200.00 and 1500."

— 2014 CHEVROLET EQUINOX owner · ENGINE,LANE DEPARTURE,FORWARD COLLISION AVOIDANCE · Filed 2021-03-11

"Car has 57,323 p0013 was replaced less than one week ago and now it's popping back up with a p0014."

— 2015 CHEVROLET EQUINOX owner · ENGINE · Filed 2019-01-01

All reports filed by vehicle owners directly with the U.S. Department of Transportation.

📊 Complaint Trend by Model Year

1
'11
2
'12
1
'14
1
'15
1
'17

Common Causes on CHEVROLET EQUINOX

Based on NHTSA complaint component analysis for this vehicle.

ENGINE 50%
ENGINE,VISIBILITY/WIPER 16.7%
POWER TRAIN,ENGINE,FUEL/PROPULSION SYSTEM 16.7%
ENGINE,LANE DEPARTURE,FORWARD COLLISION AVOIDANCE 16.7%

What To Do Next

  1. 1
    Check for recalls on YOUR VIN

    Go to nhtsa.gov/recalls and enter your VIN. If your vehicle is covered, repairs are free.

  2. 2
    Get a proper diagnosis

    A code alone doesn't tell you the exact failed part. A diagnostic at a shop ($50–$150) pinpoints the root cause before you spend money on parts.

  3. 3
    Compare repair quotes

    Get 2–3 quotes. Dealer vs. independent shop prices often differ 30–50% for the same repair.

Frequently Asked Questions

P0013 on Other Vehicles