P0011 on Volkswagen Jetta
A Camshaft Position - Timing Over-Advanced or System Performance Bank 1
Methodology: Reviewed against the SAE J2012 generic DTC definition and NHTSA owner-complaint patterns, then scoped to Volkswagen Jetta context without treating complaints as confirmed diagnoses.
Sources: SAE/OBD-II definitions, manufacturer service information, and public reliability reports (including NHTSA where applicable).
- SAE J2012 Diagnostic Trouble Code Definitions — Generic diagnostic trouble code definition reference for P0011.
- NHTSA recalls, complaints, and manufacturer communications — Used to check public owner complaint context, recall status, and safety-related manufacturer communications by VIN or vehicle.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
What P0011 Means on Your Volkswagen Jetta
P0011 is a diagnostic trouble code indicating: A Camshaft Position - Timing Over-Advanced or System Performance Bank 1. This code relates to the fuel and air metering system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.
Real Volkswagen Jetta Owner Reports
Source: NHTSA Complaints Database
"My cosine and i have a 2012 and a 2013 vw. jetta that has and had the same problems. his first. p0011 code. the symptoms check engine light, the engine has a hard start condition, reduction in fuel mileage, the engine runs rough, hesitate, or stall."
"Event's started last year in december. vehicle started experiencing inconsistent rpms at idle noticeably after 1 minute that will fluctuate between 600 to 900, even spiking to 1.2k rpms. recorded a video as evidence (vw mechanic said that meant nothing to him at "~30-40+ years experience")."
"While driving the vehicle, it starts to stall or have stalled while slowing down or sitting in rush hour traffic; or while stopped at a red light. the dealer stated the code was p0011 and the camshaft position sensor needed to be replaced. the part was about $75 and the labor just under $400."
All reports filed by vehicle owners directly with the U.S. Department of Transportation.
📊 Complaint Trend by Model Year
Common Causes on Volkswagen Jetta
Based on NHTSA complaint component analysis for this vehicle.
What To Do Next
-
1
Check for recalls on YOUR VIN
Go to nhtsa.gov/recalls and enter your VIN. If your vehicle is covered, repairs are free.
-
2
Get a proper diagnosis
A code alone doesn't tell you the exact failed part. A diagnostic at a shop ($50–$150) pinpoints the root cause before you spend money on parts.
-
3
Compare repair quotes
Get 2–3 quotes. Dealer vs. independent shop prices often differ 30–50% for the same repair.