Whirlpool Washing Machine ⚠️ Stop Using

Whirlpool Washing Machine Error Code Int

Whirlpool washer error code Int: Interrupted.

Last reviewed: Aug 7, 2026 Last updated: Aug 7, 2026

Methodology: Reviewed against official Whirlpool washer support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Whirlpool Product Help - Washer error codes and troubleshooting — Official Whirlpool Product Help entry point for washer error-code troubleshooting and owner-safe checks.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

⚠️ Stop using it

Safe to leave off while you reset the cycle. Do not restart it until the lid lock and drain path look normal.

Can I fix it myself?

DIY Possible

Part: Lid lock / user interface / drain path

How much will it cost?

DIY: $0–$80 (latch or hose)

Technician: $100–$300

⏱ 10–45 min

What Does Error Int Mean on Your Whirlpool Washing Machine?

Whirlpool washer error code Int: Interrupted.

What typically fails: Lid lock / user interface / drain path

What You're Probably Seeing

→ Error code displayed
→ Machine stops mid-cycle
→ Cycle won't complete

Common Causes

• Drain hose kinked, blocked, or installed too high
• Pump filter clogged with lint or debris
• Failed drain pump or loose drain-pump wiring

How to Fix It Yourself

1 Press Start/Pause once to see if the cycle resumes normally
2 If the cycle will not restart, cancel it and power-cycle the washer for 60 seconds
3 Check that the lid or door is fully latching and that the drain hose is not kinked
4 If Int appears repeatedly on the same cycle, inspect the user interface and main control connections

🛠️ You'll need: Screwdriver set, Flashlight, Multimeter · Time: 10–45 min

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Whirlpool Washing Machine error code Int mean? ▼

Error code Int on a Whirlpool washer means the current cycle was interrupted before it finished, often after a pause, cancel event, lid-lock problem, or control issue.

How do I fix Whirlpool Washing Machine error code Int? ▼

Try resuming the cycle first. If that fails, cancel the cycle, power-cycle the washer, and check the lid lock, drain path, and control connections before starting another load.

Is it safe to use my Whirlpool Washing Machine with error code Int? ▼

Usually yes after the cause is cleared, but do not force repeated restarts if the washer is holding water or the lid lock is not working correctly.

More Whirlpool Washing Machine Codes

All Whirlpool washing machine error codes → All Whirlpool appliance codes →