Samsung
WA52T76**A*
Washing Machine
Samsung WA52T76**A* — Error Code dC
Samsung WA52T76**A* error code dC: Door open or not properly closed.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Samsung Washing Machine error code dC guide →
Repair guidance: the symptoms and steps below come from the canonical Samsung Washing Machine dC guide and apply to WA52T76**A* unless your manual says otherwise.
Symptoms on WA52T76**A*
- ⚠️ Cycle won't start
- ⚠️ Door won't open after cycle
- ⚠️ Error code on display
How to Fix Error dC on WA52T76**A*
- 1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 Check door seal for debris or warping preventing full closure
- 3 Test the door latch mechanism — if it clicks but machine won't start, the switch is faulty
- 4 Replace the door lock assembly ($25–$80 part, 15–30 min DIY)
- 5 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Screwdriver set, Putty knife
· Time: 15–30 min
Questions People Also Ask for Error dC
What does Samsung Washing Machine error code dC mean? ▼
Error code dC on a Samsung Washing Machine means: Door open or not properly closed. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Samsung Washing Machine error code dC? ▼
First, unplug the washing machine for 60 seconds to reset the control board. If error dC returns, the root cause (door open or not properly closed) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Samsung Washing Machine with error code dC? ▼
It depends on the cause. Most dC errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.