Samsung
Refrigerator
✅ Safe for Now
Samsung Refrigerator Error Code 33E
Samsung Refrigerator error code 33E: Ice room temperature sensor failure.
Should I unplug it?
✅ No — safe for now
Safe to use briefly. A faulty sensor causes poor performance but rarely immediate danger.
Can I fix it myself?
DIY Possible
Part: Temperature sensor / thermistor
How much will it cost?
DIY: $10–$60 (sensor)
Technician: $80–$250
⏱ 20–45 min
What Does Error 33E Mean on Your Samsung Refrigerator?
Samsung Refrigerator error code 33E: Ice room temperature sensor failure.
What typically fails: Temperature sensor / thermistor
What You're Probably Seeing
- → Error code on display
- → Temperature not maintained
- → Unit making unusual noise
How to Fix It Yourself
- 1 Unplug the refrigerator for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 Test the sensor with a multimeter — check resistance against the spec in the service manual
- 3 Inspect the sensor's wiring harness for corrosion or loose connector
- 4 Replace the sensor if out of spec ($10–$50 part)
- 5 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Multimeter, Screwdriver set
· Time: 20–45 min
💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.
Questions People Also Ask
What does Samsung Refrigerator error code 33E mean? ▼
Error code 33E on a Samsung Refrigerator means: Ice room temperature sensor failure. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Samsung Refrigerator error code 33E? ▼
First, unplug the refrigerator for 60 seconds to reset the control board. If error 33E returns, the root cause (ice room temperature sensor failure) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Samsung Refrigerator with error code 33E? ▼
It depends on the cause. Most 33E errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.