Samsung
WD53DBA9**H*
Dryer
Samsung WD53DBA9**H* — Error Code bC2
Samsung WD53DBA9**H* error code bC2: Control panel button stuck.
Last reviewed:
Last updated:
Methodology: We combine manufacturer references with recurring service patterns, then review for safe, step-by-step repair guidance.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
Looking for the full diagnosis and repair guide? View complete Samsung Dryer error code bC2 guide →
Repair guidance: the symptoms and steps below come from the canonical Samsung Dryer bC2 guide and apply to WD53DBA9**H* unless your manual says otherwise.
Symptoms on WD53DBA9**H*
- ⚠️ Error code displayed
- ⚠️ Dryer not completing cycle
- ⚠️ Clothes still wet after full cycle
How to Fix Error bC2 on WD53DBA9**H*
- 1 Unplug the dryer for 60 seconds then plug back in — this resets the control board and clears many temporary faults
- 2 Check all wiring harness connections to the main control board — reseat any loose connectors
- 3 If the board shows burn marks or damaged components, replacement is needed ($80–$300)
- 4 If the error persists after basic troubleshooting, contact a qualified appliance technician
🛠️ You'll need: Multimeter, Screwdriver set
· Time: 30–120 min
Questions People Also Ask for Error bC2
What does Samsung Dryer error code bC2 mean? ▼
Error code bC2 on a Samsung Dryer means: Control panel button stuck. The appliance detected this condition and has stopped or limited operation to prevent further damage.
How do I fix Samsung Dryer error code bC2? ▼
First, unplug the dryer for 60 seconds to reset the control board. If error bC2 returns, the root cause (control panel button stuck) needs to be addressed — check connections, filters, and hoses before calling a technician.
Is it safe to use my Samsung Dryer with error code bC2? ▼
It depends on the cause. Most bC2 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.